Results 1 to 6 of 6
-
05-24-2007, 04:46 PM #1Platinum Member
- Join Date
- May 2007
- Posts
- 960
- Location
- SE NY
- Tractor
- NH TC34DA 34HP HST, 2 rear remotes, front diverter, loaded R4's, MF 30 TLB
Hydraulic adds
I guess this belongs here. One rear remote . Added a diverter valve to run angle plow up front and snow blower chute in the back. Front also runs a thumb in the summer.
First attempt at pictures.Bob H
NH 2007 TC34DA 1985 MF30E Hoe
-
05-25-2007, 06:46 AM #2Bronze Member
- Join Date
- Sep 2006
- Posts
- 50
- Location
- Nashville, TN
- Tractor
- Kubota L3010
Re: Hydraulic adds
Welcome and nice job! I like the hoe rack on the back. Any problems plumbing the lines?
-
05-25-2007, 08:35 AM #3Platinum Member
- Join Date
- May 2007
- Posts
- 960
- Location
- SE NY
- Tractor
- NH TC34DA 34HP HST, 2 rear remotes, front diverter, loaded R4's, MF 30 TLB
Re: Hydraulic adds
No problems plumbing except running out of fittings. Also could not decide on R1 or R2 hose. Had some of each. R2 is way over kill but much more robust. I use reusable hose ends and they are hose size specific. I wish I had a crimper $1000 and could use crimp fittings. There are more types available and they are cheaper.
There is a shovel above the hoe. It's nice , they go where I go.Bob H
NH 2007 TC34DA 1985 MF30E Hoe
-
06-03-2007, 08:38 PM #4Silver Member
- Join Date
- Oct 2002
- Posts
- 238
- Location
- Connecticut
- Tractor
- Kioti LK2554
Re: Hydraulic adds
Nice setup for the snowblower. Although I use a hydraulic motor and mine spins 360 degrees, cause I like to shoot myself in the face every once in awhile.
Bob
Kioti LK2554
-
06-08-2007, 01:46 AM #5Veteran Member
- Join Date
- Sep 2006
- Posts
- 2,209
- Location
- North Texas
- Tractor
- IH M Farmall-propane powered, H Farmall (father-in-laws), Ford 1300 diesel
Re: Hydraulic adds
Nice clean install. That's a high dollar hoe holder you have there (copper pipe?).
Praise is not something you do to get closer to God, praise is a response to God being close to you.
-
06-14-2007, 07:59 PM #6Platinum Member
- Join Date
- May 2007
- Posts
- 960
- Location
- SE NY
- Tractor
- NH TC34DA 34HP HST, 2 rear remotes, front diverter, loaded R4's, MF 30 TLB
Re: Hydraulic adds
Don't know where to put this so might as well use my own thread. It could go 6 other places.
Agricultural Tractors & Equipment - ABC Groff, Inc
Go to this web site and look at Fasse valves.
Probably cost like they were made at Fort Knox but what a clean package.Bob H
NH 2007 TC34DA 1985 MF30E Hoe
Reply With Quote
