Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 29
  1. #11
    Bronze Member Birch Hill Farm's Avatar
    Join Date
    Jun 2011
    Posts
    78
    Location
    Kentucky
    Tractor
    International 444

    Default Re: Adding additional Hydraulic hookups?

    Im actually not sure what they do. I believe it has electric tie so I assume the hydraulics is just to open and let the bale out. It seems to have two hoses. Here is a picture of it. Its a vermeer 504g 4x5. Have not purchased it yet because I want to make sure it will work on our tractor.
    http://www.yfmonline.com/images/290_IMG_1720.JPG

  2. #12
    Silver Member
    Join Date
    Dec 2011
    Posts
    226

    Default Re: Adding additional Hydraulic hookups?

    So it looks like thebaler needs 1 double acting service, so you need a double acting valve on the tractor.

    Cant remember??? Have you any valves fitted to the tractor so far??

  3. #13
    Bronze Member Birch Hill Farm's Avatar
    Join Date
    Jun 2011
    Posts
    78
    Location
    Kentucky
    Tractor
    International 444

    Default Re: Adding additional Hydraulic hookups?

    Thanks so much for the continued help! I bought a baler today and ended up going with a new holland 630. It has two hydraulic hoses to hook up and they operate to open and close the rear gate to let the bales out. I never have added any hook ups as i ended up keeping the sickle bar we have so, currently the situation is i have no place to hook up any hoses, what do I need to make this work? I know many of these tractors have front end loaders so there must be away. Thanks again for the help.

  4. #14
    Bronze Member Birch Hill Farm's Avatar
    Join Date
    Jun 2011
    Posts
    78
    Location
    Kentucky
    Tractor
    International 444

  5. #15
    Silver Member
    Join Date
    Dec 2011
    Posts
    226

    Default Re: Adding additional Hydraulic hookups?

    Thats probably right , but it displays a blank page for me!!

    Dueto the age of the tractor, the valve sets will i think be hard to find and expensive!!, you may have more luck in salvage yards??

  6. #16
    Bronze Member Birch Hill Farm's Avatar
    Join Date
    Jun 2011
    Posts
    78
    Location
    Kentucky
    Tractor
    International 444

    Default Re: Adding additional Hydraulic hookups?

    I think your right but, what about a different direction and make my own set up? Could I tap into the existing system with a duel action valve like from a log splitter and add hookups to that? It only has to have two simple functions like a log splitter to open and close a tailgate.

  7. #17
    J_J
    J_J is online now
    Super Star Member J_J's Avatar
    Join Date
    Sep 2003
    Posts
    15,792
    Location
    JACKSONVILLE, FL
    Tractor
    Power-Trac 1445, KUBOTA B-9200HST

    Default Re: Adding additional Hydraulic hookups?

    If you have an external path for the hyd, you can add valves to control whatever.

    IF the hyd are internal, there is usually a cover plate for a hyd circuit to add additional valves to the tractor.
    J.J.

    When I works, I works hard. When I sits and thinks, I goes to sleep.

    Git er done.

  8. #18
    Bronze Member Birch Hill Farm's Avatar
    Join Date
    Jun 2011
    Posts
    78
    Location
    Kentucky
    Tractor
    International 444

    Default Re: Adding additional Hydraulic hookups?

    The pump is mounted up front by distributer and has two external lines running back length of tractor back to controls and fluid tank under driver seat. Are these lines what you would tap into for additional valves?

  9. #19
    Bronze Member Birch Hill Farm's Avatar
    Join Date
    Jun 2011
    Posts
    78
    Location
    Kentucky
    Tractor
    International 444

    Default Re: Adding additional Hydraulic hookups?

    Quote Originally Posted by cyrush View Post
    Birch hill farm see atts for info previously discussed, this should answer your questions

    I have used the 444 European parts book as diagrams are clearer !!!!
    If I use the existing tapping on the control head can I hook a duel action valve to that port or will it only be able to be used as a single action, like a simple lift with gravity drop?

  10. #20
    Silver Member
    Join Date
    Dec 2011
    Posts
    226

    Default Re: Adding additional Hydraulic hookups?

    The existing tapping can be used as a supply, it will only work when the hydraulic lever is in the raised position.

    The return will have to go to the filler point at the rear, it would be better if the returnwas tapped into the point where the drain plug is !!

Page 2 of 3 FirstFirst 123 LastLast

Similar Threads

  1. Adding additional rear remotes to a 4520
    By canoetrpr in forum John Deere Owning/Operating
    Replies: 12
    Last Post: 09-01-2011, 02:04 PM
  2. how do i install rear hydraulic hookups?
    By brandokw in forum Hydraulics
    Replies: 5
    Last Post: 07-07-2011, 03:57 PM
  3. Adapt for Hydraulic rear hookups
    By mikereid in forum Yanmar
    Replies: 5
    Last Post: 05-19-2010, 09:14 AM
  4. Adding additional hydraulics
    By BruceWard in forum Kubota Owning/Operating
    Replies: 4
    Last Post: 11-05-2008, 05:58 PM
  5. Adding additional lights
    By Oscar in forum Customization
    Replies: 23
    Last Post: 11-02-2001, 12:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.