Results 11 to 19 of 19
-
02-05-2013, 09:17 AM #11
-
02-05-2013, 05:31 PM #12Gold Member
- Join Date
- Jan 2013
- Posts
- 356
- Location
- jackson,oh
- Tractor
- 918 allis-chalmers
Re: Gas storage
Years ago,dunno about now,Marathon gas always had an additive to help it remain powerful during storage. I had an old English Ford Cortina GT that hadn't been started for 4 full years.
So I finally sold it as a probable `non-runner'. Well,when the guy came to look at it, I put a set of jumper cables on it, and the Cortina started right up! What a surprise! don-ohio (:^)
-
02-05-2013, 09:13 PM #13Veteran Member
- Join Date
- Jan 2010
- Posts
- 1,785
- Location
- Mostly East Central Oklahoma
- Tractor
- JD cut
Re: Gas storage
Do additives really remove water from fuel, or just disperse throughout the fuel so it can go through the combustion process?
-
02-06-2013, 09:22 PM #14Gold Member
- Join Date
- Jan 2013
- Posts
- 356
- Location
- jackson,oh
- Tractor
- 918 allis-chalmers
-
02-06-2013, 11:44 PM #15Veteran Member
- Join Date
- Jan 2010
- Posts
- 1,785
- Location
- Mostly East Central Oklahoma
- Tractor
- JD cut
Re: Gas storage
Yup, that is part of what I was getting at.
-
02-15-2013, 09:54 PM #16Platinum Member
- Join Date
- Dec 2007
- Posts
- 857
Re: Gas storage
A small amount of alcohol will bind with water, and be carried through (to burn). With the high amounts of alcohol in gas now, depending on vehicle use/storage/fill practices, the water alcohol mix can stratify - saw some pretty rancid stuff drained out of a Uhaul truck recently.
Startron takes the approach (gas additive at least) to disperse the water into really tiny particles for combustion. Not my natural first choice, but I didn't get asked about this E## nonsense either !
A lot of people get it wrong, but if you can set up a gas engine for deliberate H2O injection successfully, then I guess a few really tiny drops won't hurt.
For the general market, they have to design an additive with the assumption that a mechanical water separator is not in place, esp. for gas.
With a mechanical water separator in place, then Stanadyne's strategy to de-emulsify (coagulate) water molecules in diesel makes sense to me.
I've been using Starton (gas addy, aka Smurf pee) for my small motor stuff, like it so far.
Rgds, D.
-
02-16-2013, 12:51 AM #17Gold Member
- Join Date
- Apr 2012
- Posts
- 341
- Location
- Northern Ontario, Canada
- Tractor
- 2012 Kioti CK27HST
Re: Gas storage
To the best of my knowledge all Shell stations in Ontario, Canada that have 'high test' have no ethanol in it. I run high test shell in all my gas powered stuff. Walk behind snow blower, 2 gennys, 2 lawn mowers and my Jeep.
Unfortunately my boat I have to fill up at the marina, (it is too big for me to trailer with the Jeep), and that has 5% ethanol. In the boat I use Sea Foam gas treatment. It works good
-
02-16-2013, 12:55 AM #18Gold Member
- Join Date
- Jan 2013
- Posts
- 356
- Location
- jackson,oh
- Tractor
- 918 allis-chalmers
Re: Gas storage
Looking4 new.......better do the ethanol test...... I know Shell is using it down here, so I doubt you're ethanol free up there.Could be,though,and the test will tell you fer sure. don-ohio (:^D
-
02-16-2013, 08:50 AM #19Platinum Member
- Join Date
- Dec 2007
- Posts
- 857
Similar Threads
-
Inside Garage Storage Gas Tank
By castiman in forum Oil, Fuel & LubricantsReplies: 9Last Post: 01-10-2013, 07:12 PM -
Rust in large gas storage tank
By wjoerob in forum Related TopicsReplies: 3Last Post: 08-09-2009, 09:07 PM -
Can gas storage tank be converted to diesel
By Slippy in forum Oil, Fuel & LubricantsReplies: 23Last Post: 05-27-2008, 01:35 PM -
Diesel Storage (IE gas cans)
By RobJ in forum Oil, Fuel & LubricantsReplies: 1Last Post: 05-19-2008, 02:11 PM -
Natural Gas storage?
By MDM in forum Rural LivingReplies: 37Last Post: 11-29-2007, 03:43 PM



Reply With Quote

