Page 16 of 21 FirstFirst ... 613141516171819 ... LastLast
Results 151 to 160 of 210
  1. #151
    New Member
    Join Date
    Dec 2012
    Posts
    1
    Location
    Oakes, ND
    Tractor
    Bobcat Toolcat 5600

    Default Re: If you have Toolcat questions, ask them here...

    How do you raise the bed of a toolcat 5600 when the power is dead...you can't get to the battery to charge it and you can't raise the bed without the charge.....HELP!!!

  2. #152
    Platinum Member DEWFPO's Avatar
    Join Date
    Jun 2007
    Posts
    687
    Location
    "High in the Rockies"

    Default Re: If you have Toolcat questions, ask them here...

    Quote Originally Posted by Grotelueschen View Post
    How do you raise the bed of a toolcat 5600 when the power is dead...you can't get to the battery to charge it and you can't raise the bed without the charge.....HELP!!!
    See : http://www.tractorbynet.com/forums/t...y-5600d-2.html

    Also, I looked at Toolcat and it appears you can remove the plastic panel behind the cab and below the bed to get access to the battery. I have not done this myself, but it looks like it can be done.

    DEWFPO
    2009 Toolcat 5600 "D-Series", Hi-Flow, 29's, 72" SB-200, 84" Snowblade, 62" Lo-Pro Bucket

    SOLD - 2006 MF GC2300, 2350 FEL, 2315 MMM, 2360 SB, KingKutter CarryAll

  3. #153
    Member
    Join Date
    Aug 2008
    Posts
    39
    Location
    middle Tn
    Tractor
    Toolcat D

    Default Re: If you have Toolcat questions, ask them here...

    See the post in this forum dated 11/20/2011 titled "How To Replace A Dead Battery 5600d".

  4. #154
    New Member
    Join Date
    Feb 2012
    Posts
    5
    Location
    Ottawa,Ontario
    Tractor
    Many

    Default Re: If you have Toolcat questions, ask them here...

    Dealer says I need new turbo on 2008 5600, anyone know of a place in Ontario or Quebec who rebuilds turbos ?

  5. #155
    New Member
    Join Date
    Feb 2012
    Posts
    5
    Location
    Ottawa,Ontario
    Tractor
    Many

    Default Re: If you have Toolcat questions, ask them here...

    I'd also be happy with a contact for a good quality aftermarket turbo.
    I just can't accept $3750 + labour at the dealer.
    I'm at the point where I'll park it and use it for parts for the other two.
    Have a boatload of snow so far this season with another 4" forecast in two days.
    Plz help.

  6. #156
    New Member
    Join Date
    Jul 2012
    Posts
    6

    Default

    What is the hyd. oil type in bobcat 2300 and quantity?

  7. #157
    Platinum Member DEWFPO's Avatar
    Join Date
    Jun 2007
    Posts
    687
    Location
    "High in the Rockies"

    Default Re: If you have Toolcat questions, ask them here...

    If my information is correct the turbo on my 2009 5600D is a Mitsubishi MHI TD03-7G (same as S160 skid steer?)
    P/N : 49131-02020 (replaces 49131-02010)
    kubota P/N : 1G622-17013
    oil cooled

    Perhaps you can Google search it and see if you can find it cheaper, these should be fairly common on a variety of pieces of equipment.

    DEWFPO
    2009 Toolcat 5600 "D-Series", Hi-Flow, 29's, 72" SB-200, 84" Snowblade, 62" Lo-Pro Bucket

    SOLD - 2006 MF GC2300, 2350 FEL, 2315 MMM, 2360 SB, KingKutter CarryAll

  8. #158
    New Member
    Join Date
    Aug 2012
    Posts
    9
    Location
    Oregon, WI
    Tractor
    04 Toolcat 500k 773 #7

    Default Re: If you have Toolcat questions, ask them here...

    Hi UFM82, I replace the axle seals on my 04 Toolcat, I thought I read that 5w30 could be used in the rearend, dores tis sound correct?

  9. #159
    New Member
    Join Date
    Feb 2012
    Posts
    5
    Location
    Ottawa,Ontario
    Tractor
    Many

    Default Re: If you have Toolcat questions, ask them here...

    Quote Originally Posted by DEWFPO View Post
    If my information is correct the turbo on my 2009 5600D is a Mitsubishi MHI TD03-7G (same as S160 skid steer?)
    P/N : 49131-02020 (replaces 49131-02010)
    kubota P/N : 1G622-17013
    oil cooled

    Perhaps you can Google search it and see if you can find it cheaper, these should be fairly common on a variety of pieces of equipment.

    DEWFPO
    Yup, was able to find on internet out of China, will know more when they, yes I ordered two, arrive.

    New problem is the '05 Toolcat. Runs like a champ for 15 minutes then the hand throttle has no affect on rpm, machine limps along in idle.
    We are thinking fuel pump ? sensor ?

    But we were able to fit the turbo from the '05 on the '08 and now the '08 is good to go again, ran it for 6 hours today blowing back snowbanks without any issues.

    Does anyone know of any diagnostic program, ideally on Ipad, that will communicate with toolcats and skidsteers ?

  10. #160
    Veteran Member SSdoxie's Avatar
    Join Date
    Jun 2010
    Posts
    1,911
    Location
    Cumberland Plateau, TN
    Tractor
    Bobcat CT225

    Default Re: If you have Toolcat questions, ask them here...

    Quote Originally Posted by rcook55 View Post
    Hi UFM82, I replace the axle seals on my 04 Toolcat, I thought I read that 5w30 could be used in the rearend, dores tis sound correct?
    The differential is Limited Slip so a Limited Slip fluid should be used. Using engine oil or an ISO hydraulic fluid could affect braking (wet disc brakes) and/or Limited Slip function.
    Dennis

    CT225 w/7TL QA FEL, 60"tooth dirt bucket, 68" smooth bucket, Pallet Forks, Bale Spear. Hydrualic top llin, QH, 48 RC, 60" tiller, Angle blade, Landscape rake, Carry-all, Post hole auger.

Page 16 of 21 FirstFirst ... 613141516171819 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.