Results 1 to 4 of 4
-
05-28-2013, 06:08 PM #1New Member
- Join Date
- May 2013
- Posts
- 4
- Location
- Scio, OR
- Tractor
- Simplicity
New to me Simplicity, need help identifying
So today I got for what I consider a good price, a "new" tractor. It hadn't fired ran in 5 years when it was parked indoors. Today we aired up the tires, put some gas in it, and jump started it and it fired up great. Was able to drive it right up on to the truck.
Anyhow, I'm not really sure exactly what it is. The previous owner said he thinks it's a 68 but isn't entirely sure.




It's got a hydraulic leak somewhere, the blade won't stay in the upright position, it'll slowly lower itself back down. Other than that it mainly just needs cleaned up and a lot of maintenance. Not bad for free.
-
05-28-2013 06:08 PM # ADS
-
06-02-2013, 12:32 AM #2New Member
- Join Date
- Dec 2012
- Posts
- 24
- Location
- ohio
- Tractor
- Massey TO35, 9NFord
Re: New to me Simplicity, need help identifying
Your tractor looks to be 67 68 Landlord . Your cylinder seals are leaking by. that is if you don't find any puddles on the ground.
Dan
-
06-02-2013, 11:55 AM #3
Re: New to me Simplicity, need help identifying
Try doing some research here: http://www.simpletractors.com/default.htm
Your tractor has been repainted and other changes are likely over the years, so it would take a while to pin down exactly what model it is. The easiest way to "date it" would be to identify the engine by model number - but that only works if someone hasn't changed the engine, some time over the last 45-50 years...Power Trac PT-425 w/numerous attachments
Allis-Chalmers B-210 w/several attachments
Gravely 5260 walk-behind w/two attachments
Yamaha Rhino 450 UTV w/numerous mods
More pictures & info about my garden tractors
-
06-06-2013, 06:35 AM #4Gold Member
- Join Date
- Apr 2011
- Posts
- 497
Re: New to me Simplicity, need help identifying
That was made between 1965 to 1967. 1968s were different. Good tractors, I have one. Too bad the tiller pulley has such a bend in it.
Similar Threads
-
Identifying bx pto kit
By RDG in forum Kubota Buying/PricingReplies: 5Last Post: 04-04-2012, 02:23 PM -
NEED HELP IDENTIFYING
By cqlawncare in forum RototillersReplies: 5Last Post: 07-19-2010, 03:26 PM -
Help identifying
By cef2lion in forum 2-Wheeled TractorsReplies: 5Last Post: 07-19-2010, 08:47 AM -
Need help identifying
By Lee2010 in forum General Lawn & GardenReplies: 1Last Post: 09-07-2009, 04:22 PM -
Need help identifying
By Degree in forum Chinese TractorsReplies: 26Last Post: 07-02-2004, 11:07 AM


Reply With Quote

