Here is my B20 Almost totally setup for snow. I am in the middle of making a canopy for her with 1/2 windows for me. The mount plate is made of all 3/16 cold rolled plate and everything was cut with my Lincoln Plasma cutter. Took about 7 hours to build and weld up. The plate is bolted into the bucket with 3/4 grade 8 bolts, so that in the off season I can not have it in the bucket. Plow was bought on craigslist for $50.00. It will be going out for media blasting and will get a good coat of Kubota Orange in the spring. Plow is 6' wide and 28" tall. For now it's a manual angle until I can find away to add a hydraulic circuit to the FEL.
I have a 150lbs weight I put in the backhoe bucket to balance out the weight a little or the steering gets a little heavy.
This replaced my 05 f250 with a fisher xtreme v plow. I will miss being warm this winter, but I will still have fun with the Buta!