1025R hydraulic issue

   / 1025R hydraulic issue #1  
B

billb1385

New member
Joined
May 12, 2015
Messages
6
Location
Foley, MO
Tractor
John Deere 1025R
Removed the front end loader from 1025r. Re-installed 2 hours later. Now, when I try to tilt the bucket down, it comes up. Hoses are connected properly.
 
   / 1025R hydraulic issue #2  
Take the quick connects off and reconnect them. I’ve got good money that one of them looks connected but isn’t. When I had a Kubota if they weren’t seated good it just worked slow or jerky. I have a JD2025r and when one of them wasn’t connected good it did like you describe and started working backwards.
 
   / 1025R hydraulic issue
  • Thread Starter
#3  
dodge man said:
Take the quick connects off and reconnect them. I’ve got good money that one of them looks connected but isn’t. When I had a Kubota if they weren’t seated good it just worked slow or jerky. I have a JD2025r and when one of them wasn’t connected good it did like you describe and started working backwards.
Click to expand...

You were spot on! Hoses felt tight but one just cocked and not seated. All is good! Thanks.
 
You must log in or register to reply here.
 

Footer Links 1

Top