andyh1956
New member
Greetings from Mississippi! I need some help tonight. I am having to replace the right front hub bearings in my little 3000. the seal I removed was almost non existent. string, fence wire, vines and just about done away with it. my question is about orientation of the seal. it is cup shaped with a wire spring in the cup. it will drive hard onto the spindle & hub slip over it with the cup to the outside. with the cup to the inside it don't look the hub will slide over it. it looks to me like it was made more to keep foreign material out & not so much to keep grease in. I do not have grease able hubs but I have a hard time leaving that spring on the outside! thanks
Andy
Andy