Have a JD 3025E and was stepping off the side with wet feet and slipped and grabbed the first thing I could which happened to be the bucket controls. Ended up pulling down on the stick with a good amount of weight. The lever now goes down a lot further then it did before and about double the distance that it moves up. If I don’t hold the lever centered it falls down a bit and the bucket raises. Obviously the lever got pulled down too far and something internally got damaged. The controls seem to be HEMA AW33977. Looking online that’s about $1200 for a new one. Curious as to if anyone has had a similar issue or has a idea what may have broke internally so I could maybe replace a couple small parts vs the whole thing. Any help is appreciated. Thanks