Snoxracer
New member
- Joined
- Sep 14, 2009
- Messages
- 15
Just finished turning up the injection pump on my 4310 utility, and now it runs really good! I turned the rack out 1 1/4 turns and it will haze black under a good load then goes clear again once the load is off. I will be putting my egt sensor in this afternoon and see what full throttle w/load see for egt's and I will report back with the actual temps. I am guessing that they aren't very high, and if they are, I will be getting a turbo for it!!!
Dustin
Dustin
Last edited: