53 Inch 3/4 Drive Belt? WTB?

[PBinWA]

Anyone have an internet source for a 53 to 54 Inch 3/4 Drive/Fan belt? It's got "teeth" on it (probably not the right term).

The old belt has "Pirelli Line A-X" stamped on it.

NAPA and my local JD dealer don't have anything that matches this size. They have 52 inch and then 55 inch. 52 is too short. 55 is OK but I have the tension maxed out. I think 53 1/2 would be ideal.

It's from an old Befco Hurricane H25 Flail Mower. I keep forgetting to call them early in the day since I'm on the west coast.

Thanks,

PB

 

[dubba]

Is this it?
OREGON PART 75-222/75222
BELT BUNTON-5/8 X 53 3/4

Maybe I got the numbers mixed up?
Here is the website I found it on.

 

[PBinWA]

Is this it?
OREGON PART 75-222/75222
BELT BUNTON-5/8 X 53 3/4

Maybe I got the numbers mixed up?
Here is the website I found it on.

Thanks Dubba,

I need a belt that is 3/4 of an inch wide. 53-53 1/2 inch inside length.

I think they may have one but the search engine isn't helping me much. I'll try paging through the results (or just call them if I can remember to do it).

Thanks again,

PB

 

[oliver28472]

www.gates.com