Turbys_1700
Elite Member
As many of you know last month I traded my New Holland 1720 in on a new Workmaster 50. Today I was able to check out the 621 FEL. I had an old shed that was built in the early 50's that had fallen down and needed to move the concrete blocks. These blocks are over 50# each. Some of them had concrete in the holes used for the foundation. I placed 40 in the bucket and the tractor lifted to full height at idle. I estimate 2000# of block plus the bucket at 400#. I know that some will tell me that I put too many in there. I wanted to see if the FEL was as good as advertised. It is.