MiserableOldFart
Platinum Member
- Joined
- Jun 27, 2006
- Messages
- 543
- Location
- Delaware County Catskills NY
- Tractor
- NH Workmaster 40, Kubota GR2120
Question: If the thing is wired to the lights, doesn't the current go through a relay from the ignition switch? if so, the current theoretically could be too much for the relay, if you put a huge light bar to replace on incandescent light, but even then not likely, no? The ignition switch doesn't carry the entire load of all the lights, does it? I have always assumed there was a relay. It would seem to take a lot of LEDs to add significant wattage to the system.