Rusty4242
Bronze Member
Good morning. I am going to look at a BX2750 B tomorrow for my BX23 and was wondering what the difference between the A,B and C designations were?Thanks, Rusty
Snow Difference between snow blowers models
- Thread starter Rusty4242
- Start date
Stoweski
Silver Member
Funny, I found the 2750A and the 2750C but not the B.
I was under the impression that they were the same model but different years... A being the oldest of the three. I originally was looking at the A because of what fit the B7610 based on Kubota's website. My dealer only had the C and said it was the same.
The only difference between the A and the C based on the Kubota website is that the A has a cutting width of 48.75" and the C's is 50" and the impeller diameter on the A is 16" whereas the C is 12.8".
As for the B I'm not sure since I can't find it on their website.
If you have a reputable dealer, ask him.
Good luck. I know I love using a front blower vs a walk behind blower.
Keith
I was under the impression that they were the same model but different years... A being the oldest of the three. I originally was looking at the A because of what fit the B7610 based on Kubota's website. My dealer only had the C and said it was the same.
The only difference between the A and the C based on the Kubota website is that the A has a cutting width of 48.75" and the C's is 50" and the impeller diameter on the A is 16" whereas the C is 12.8".
As for the B I'm not sure since I can't find it on their website.
If you have a reputable dealer, ask him.
Good luck. I know I love using a front blower vs a walk behind blower.
Keith
Bird
Epic Contributor
I removed a duplicate post, per your request, but that also removed a response from lp333 who said:
"I once read somewhere that model B was intended for the BX Series, while the A was intended for the B series tractors."
"I once read somewhere that model B was intended for the BX Series, while the A was intended for the B series tractors."