JD 2950 MWFD Front Tire Camber Adjustment

[Tx Jim]

I would adjust toe from 0 to 1/8" toed out.

By toed out do you mean frt or rear?? Back in the day when performing PDI on new 2wd tractors before MFWD tractors became common place I always adjusted toe-in to 1/8-3/16 on front side

 

[jd110]

I mean toed out in the front. With mfwd the specs vary depending on the model. Sometimes 0 - 1/4' Toe in. Sometimes 1/8" in to 1/8" out. I prefer to stay straight ahead to 1/8" out as a rule of thumb for mfwd axles.

 

[Tx Jim]

My 4255 operator's manual states toe-in for MFWD should be 0'' to +/-1/8''. I have heard on MFWD tractors reversing frt tire rotation reduces wear when driving on blacktop or concrete roads

 

[bigblock76]

Any special things to watch out for when changing the inner tie rods? Will the steering cylinder shaft need to be held somehow to get it to spin off?

I believe the part number I'm after is AL60161