need help with creep to reposition switch worked off and on now it does not work at all put new switch on no luck looking for relay or fuse or what need any help.
me too I was thinking there has to be a fuse and or relay it mite need to be recalibrated I had a problem last year and had to have the tractor recalibrated and they may have got creep done someone removed the wrong fuse.
If you look at Billstmaxx's 1st video @ 2:12. He mentioned that there are a few relays and fuses under the dash panel that you might want to check. Then again you said that you already replaced the switch so maybe you already know that.
yes that is going to be my next step just take it apart and see what I find if I can not find anything I will have to take to john deere but I do not want to do that thank you very much for your help.
Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
Just be careful NOT to put a fuse in the empty slot.
I've heard it will wipe out all the programming and is an expensive repair.