ksbrdmkr
Gold Member
- Joined
- Aug 17, 2013
- Messages
- 292
- Location
- Paola, KS
- Tractor
- NH TN55S, DK45SE Cab,WD 45 Allis Chalmers 1955, CS2410
Used my loader to sink a few steel post this afternoon and had water running out of the bottom angle iron that is spot welded to the bottom of the loader. Does anyone have any good ideas for sealing up the angle iron to keep the water out. My ideas are a good caulk, asphalt roofing cement, spray rubber sealant or welding a solid bead.