edlkll
New member
Trying to repair some work bushing on a Kubota L3300DT steering arm that hooks to the ty rod ends. I got it apart and there are 2 bushings and oil seals and washer on each end or the
steering arm. There is a pin that goes through the frame and has a plate and 2 bolts that hold it in place and a braket on top with 2 bolts. I order the bushings and oil seals and pin. The
bushings look worn and looked at getting them out but it looks like a ledge on the top an bottom of this wont let the bushing out. I was wondering if any one has repaired this arm that I am talking about and replaced the bushing? I so how do you go about getting the old ones out. Some ones answer will be help in me getting these bushing replaced. edlkll
steering arm. There is a pin that goes through the frame and has a plate and 2 bolts that hold it in place and a braket on top with 2 bolts. I order the bushings and oil seals and pin. The
bushings look worn and looked at getting them out but it looks like a ledge on the top an bottom of this wont let the bushing out. I was wondering if any one has repaired this arm that I am talking about and replaced the bushing? I so how do you go about getting the old ones out. Some ones answer will be help in me getting these bushing replaced. edlkll