racerboy832
Silver Member
After Changing all the Oil in the Hydrostatic oil the machine doesn't seem to have the power it did in forward and also at the PTO. It seems ok in reverse. It drained about 7 gallons out and I put 7 gallons in. It got a little better sitting over night, I thought it might be air but I was told they are self bleeding. I am now able to stop the PTO shaft with putting pressure on the backhoe ( Backhoe has a seperate pump). The oil I used was what was suggested. Powerfluid 821 equivlant from Tractorsupply... Any help before I have a nervous breakdown. My entire family are mechaincs but not too sure about this system.