Malachi Raymond
New member
Onan T-260G 24hp horizontal shaft engine*-*$250
Onan T-260G 24hp horizontal shaft engine for rebuild. It came off a saw mill and had been rebuilt by 31 hours ago. My hired had forgot to check the oil and it burnt some due to the fact that it was not really broken in yet from the rebuild and it ended up running out of oil. I believe that a valve is stuck on one of the cylinders and it hit the piston and it bent the valve so it is stuck open. the engine will crank until it come to the valve and will to go any further. I didn't have time to get it fixed so I ended up buying a new engine to put on the sawmill. I have the manual for this and I also found a rebuilding instruction manual off the internet that I printed off that will go with it.*
Just wondering does anyone think that's a good deal or no was thinking about buying it
Onan T-260G 24hp horizontal shaft engine for rebuild. It came off a saw mill and had been rebuilt by 31 hours ago. My hired had forgot to check the oil and it burnt some due to the fact that it was not really broken in yet from the rebuild and it ended up running out of oil. I believe that a valve is stuck on one of the cylinders and it hit the piston and it bent the valve so it is stuck open. the engine will crank until it come to the valve and will to go any further. I didn't have time to get it fixed so I ended up buying a new engine to put on the sawmill. I have the manual for this and I also found a rebuilding instruction manual off the internet that I printed off that will go with it.*
Just wondering does anyone think that's a good deal or no was thinking about buying it