Randyr3554
New member
- Joined
- Jun 19, 2010
- Messages
- 10
Will be doing a R&R on the rad in my MF35. How difficult is the job?
What I see is 2 nuts on the bottom, a support rod with a cotter pin up top, and that's all.
Does the hood need to be removed to allow the rad to come out?
Are the bottom bolts removable from the old rad so they can be re-used?
Thanks.
What I see is 2 nuts on the bottom, a support rod with a cotter pin up top, and that's all.
Does the hood need to be removed to allow the rad to come out?
Are the bottom bolts removable from the old rad so they can be re-used?
Thanks.