Erbid
New member
- Joined
- Dec 30, 2021
- Messages
- 13
- Tractor
- Yanmar SA424
At wits end. Burn up about 4 sets of high lift or mulching blades every year. Place is getting more level bit by bit but gophers (almos tgonr, but I have one in my sights this year) and runoff (pit to catch water and little dams beyound them and settle sand).
Anyhow, noone sells the cut coener (highest lift portion of the blade cut off) or flat blades for the mowers I use. (Really, I need to see what blades are avalable before I snag a mower.) Using a AYT - Husqvarna yth24v48 and an MTD - Troy-Bilt Pony with a 42" deck (I bag with it so setting it aside with some regular blades for now) If I shapen the blades after the sand removes the lift portion, I can get a bit of suprising life out of 'em. But flat 16 11/16 blades with the 5/8 5-point star hole would be nice. Maybe some from manufacturing before they smoosh the ltft tabs or mulching ripples into them?
Erbid
Anyhow, noone sells the cut coener (highest lift portion of the blade cut off) or flat blades for the mowers I use. (Really, I need to see what blades are avalable before I snag a mower.) Using a AYT - Husqvarna yth24v48 and an MTD - Troy-Bilt Pony with a 42" deck (I bag with it so setting it aside with some regular blades for now) If I shapen the blades after the sand removes the lift portion, I can get a bit of suprising life out of 'em. But flat 16 11/16 blades with the 5/8 5-point star hole would be nice. Maybe some from manufacturing before they smoosh the ltft tabs or mulching ripples into them?
Erbid
