I'm working on a JD 245 Garden Tractor that's about 30 years old. I took the deck spindles apart to change out the ball bearings and there was so much grease in there I didn't realize the spacers, part M110008, have slots on one side. One spacer sits on the top ball bearing inside the bushing and one is on the bottom side of the bottom ball bearing. The spindle has a grease zerk on the top and I assume the slots allow the grease to pass through to the lower ball bearing. Does anyone know which way the slotted sides face before I reassemble? See photos for details.
Trey3
Trey3