dieselscout80
Veteran Member
About how much does a TC40 MFD with a loader and a clamshell bucket weight?
TC40 Weight
- Thread starter dieselscout80
- Start date
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 21,008
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
For round numbers, figure 3,500 lb for the tractor and 1,250 for the loader. If you add a 3PH implement like a boxblade, you'll be over 5,000 lb. If your tires are loaded, add another 800 to 1000 lb depending on what is in the tires.
BTW: If you are looking at trailers, a utility trailer with two 3500 lb axles is not sufficient. By the time you add the tractor/loader and the weight of the trailer, you'll be right at the limit. If you add anything else, you'll be overloaded.
BTW: If you are looking at trailers, a utility trailer with two 3500 lb axles is not sufficient. By the time you add the tractor/loader and the weight of the trailer, you'll be right at the limit. If you add anything else, you'll be overloaded.