IslandTractor
Super Star Member
- Joined
- Sep 15, 2005
- Messages
- 17,101
- Location
- Prudence Island, RI
- Tractor
- 2007 Kioti DK40se HST, Woods BH
I fixed my Wildcat grapple and forks with putting 1/4" spacer plates on the bottom brackets. Works great and the implements fit tight now.
Spacers at the top would not require much weld to keep in place. Spacers at the bottom would need to be solidly welded as the pins would be directly in contact and all the force of down and pulling pressure on the grapple mount would be directly on those welds.
Last edited: