Rims Looking for 13x24 rims for my Ford 1920

[blue72camaro]

Well I bought this tractor last spring and lets just say Calcium has taken its toll on my rear rims. I plan on replacing rims and rear tires next year most likely but I cant seem to find 13x24 hoops for the back end available anywhere. My rims have a removable center with 6 lugs between the center and the hoop. I must admit that I havent put the tape measure to them yet so I am just going off what I see the recommended rim is per all the tire manufacturers for a 14.9-24. Anyone know if these area available anywhere or where I might be able to find a scrap one to patch mine up with if I cant find new?

Thanks,
Matt

 

[Wolfy]

Have you tried Gempler's?

 

[blue72camaro]

I looked at there site but I didnt see a 13x24 listed anywhere.

 

[millertire]

You will need to use 12 x 24, see link
24x12, 6 Loop Rim - m. e. MILLER tire

 

[capt_met]

Tractor tires 13.6x16 Like new

not sure if these will help but ran across them last night

 

[blue72camaro]

Millertire, I will have to double check the lug spacing on mine but if those will work you will be seeing an order soon.

Capt_met, not sure how those would help as they arent even close to the right size and I have no need to switch to turf tires on my tractor.

 

[Wolfy]

I think he just noticed them since 13.6x16 is what R-3 a 1920 would run.

 

[blue72camaro]

I think he just noticed them since 13.6x16 is what R-3 a 1920 would run.

Ahhh ok, I hadnt looked at what the turf tire size for it was as I use the tractor for putting in food plots quite a bit and turfs just wouldnt cut it.

 

[Wolfy]

The rims you need are out there somewhere. The 1920 was way too popular to not get replacement rims. I see them all over the place.