Syncro
Platinum Member
This has probably been described many times, however I thought I'd post some pics for the benefit of someone thats naybe heard but not seen how its done. I used winter WW fluid and poured each gallon into a resovoir, made from a 2 LB coffee can. I soldered a threaded copper fitting to the can than ran a piece of garden hose to a drill pump and into the valve stem. The time per tire was about 30 min and no leaks, except for a cupfull or so from the somewhat worn drill pump.
Hope the pictures make the process easy to understand, it really is a simple and cheap way to load your tires.
pic #1 my wife filling the coffee can resovoir, it took about 30 sec per gal.
Hope the pictures make the process easy to understand, it really is a simple and cheap way to load your tires.
pic #1 my wife filling the coffee can resovoir, it took about 30 sec per gal.