Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21
  1. #11

    Default Re: 4 Wheel steering issues

    Quote Originally Posted by theoshin View Post
    talk to your dealer - mine had the same problem. i believe they switched out the master cylinder for steering hydraulic and fixed the problem.

    ts
    what that cost ya? Ballpark?
    Thanks

  2. #12
    Silver Member
    Join Date
    Apr 2006
    Posts
    231
    Location
    North WI
    Tractor
    2006 Toolcat turbo

    Default Re: 4 Wheel steering issues

    Quote Originally Posted by nickschlemer View Post
    what that cost ya? Ballpark?
    Thanks
    nothing - covered under warantee

  3. #13
    New Member
    Join Date
    Oct 2009
    Posts
    2
    Location
    Ottawa

    Default Re: 4 Wheel steering issues

    The unit that you have has a history of minor glitches with the aws. If you have not had the sensors upgraded/ changeed this may be your problem.

    its not a big deal- the part costs less than three hundred bucks.

    Your dealer will know exactly what your talking about.

    Good Luck

  4. #14
    New Member
    Join Date
    Mar 2014
    Posts
    3
    Location
    NY
    Tractor
    Bobcats

    Default Re: 4 Wheel steering issues

    Quote Originally Posted by theoshin View Post
    mine would come out of sync very easily. they figured it must be a bleed in i think the master cylinder for the steering - replaced it and solved the problem. i used to have to realign the tires every 10-30 minutes now 1x per week.

    ts
    I have the same problem.... After two turns and it's out of alignment.....by along shot

    I've looked up the hydraulic steering at the dealer and their is no "mastery cylinder"

    There's a steering hydraulic cylinder for the front, and the identical one for the rear....
    All the plumbing goes through a hydraulic pump with several ports on it lines to the the front steering and lines to the rear...

    Please help my dealer has been no help!

    What or where is this master cylinder

  5. #15
    Veteran Member Xfaxman's Avatar
    Join Date
    Feb 2013
    Posts
    2,410
    Location
    Meridian, OK
    Tractor
    Bobcat V417 Toolcat 5610 F TORO+Loader

    Default Re: 4 Wheel steering issues

    Quote Originally Posted by Clean cut lawns View Post
    I have the same problem.... After two turns and it's out of alignment.....by along shot

    I've looked up the hydraulic steering at the dealer and their is no "mastery cylinder"

    There's a steering hydraulic cylinder for the front, and the identical one for the rear....
    All the plumbing goes through a hydraulic pump with several ports on it lines to the the front steering and lines to the rear...

    Please help my dealer has been no help!

    What or where is this master cylinder
    to TractorByNet!

    Which Toolcat do you have, 5600 or 5610?

    Which series?
    My Avatar, the TORO+Loader: Kwik-Way FEL and TORO Groundsmaster Put Together

    Compact Telehandler:
    V417 Versahander

  6. #16
    New Member
    Join Date
    Mar 2014
    Posts
    3
    Location
    NY
    Tractor
    Bobcats

    Default Re: 4 Wheel steering issues

    Quote Originally Posted by Xfaxman View Post
    to TractorByNet!

    Which Toolcat do you have, 5600 or 5610?

    Which series?
    5600. 2010. D series I believe

  7. #17
    Veteran Member Xfaxman's Avatar
    Join Date
    Feb 2013
    Posts
    2,410
    Location
    Meridian, OK
    Tractor
    Bobcat V417 Toolcat 5610 F TORO+Loader

    Default Re: 4 Wheel steering issues

    Quote Originally Posted by Clean cut lawns View Post
    5600. 2010. D series I believe
    Well my F series shop manual won't help then.

    Maybe some of the D series guys will check in with the answer.
    My Avatar, the TORO+Loader: Kwik-Way FEL and TORO Groundsmaster Put Together

    Compact Telehandler:
    V417 Versahander

  8. #18
    New Member
    Join Date
    Mar 2014
    Posts
    3
    Location
    NY
    Tractor
    Bobcats

    Default Re: 4 Wheel steering issues

    Quote Originally Posted by Xfaxman View Post
    Well my F series shop manual won't help then.

    Maybe some of the D series guys will check in with the answer.
    Is the f series that much different than the d servers when it comes to steering?

  9. #19
    Veteran Member Xfaxman's Avatar
    Join Date
    Feb 2013
    Posts
    2,410
    Location
    Meridian, OK
    Tractor
    Bobcat V417 Toolcat 5610 F TORO+Loader

    Default Re: 4 Wheel steering issues

    I don't know any thing about the D Series steering system.

    Did you find out what the problem was?

    If so, please post it here to help guys reading this thread in the future.
    My Avatar, the TORO+Loader: Kwik-Way FEL and TORO Groundsmaster Put Together

    Compact Telehandler:
    V417 Versahander

  10. #20
    Bronze Member
    Join Date
    Apr 2010
    Posts
    60

    Default

    I believe you can determine series by the serial number. Look for a plate in the rear right area under the bed.

    My guess is a solenoid that powers rear hydraulic steering cylinder is bad or not receiving power.

Page 2 of 3 FirstFirst 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.