Page 2 of 5 FirstFirst 12345 LastLast
Results 11 to 20 of 47
  1. #11
    Elite Member Xfaxman's Avatar
    Join Date
    Feb 2013
    Posts
    2,651
    Location
    Meridian, OK
    Tractor
    Bobcat V417 Toolcat 5610 F TORO+Loader

    Default Re: Toolcat 5610 series F Pictures

    Quote Originally Posted by Paystar View Post
    How is it to get at the hydraulic filters? I've only looked at the pics in the brochure and it looks a little tight where they are? (that was on the 5600, not sure where they are one the 5610 with those top mounted rads.)

    Very nice machine you have there.
    Thanks, I really like it, can do a lot with it.

    Here is the hydraulic filter, on the left side, plenty of room to reach up to it from underneath.
    -p2180039-jpg-p2180040-jpg-p2180041-jpg

  2. #12
    Platinum Member Paystar's Avatar
    Join Date
    Nov 2008
    Posts
    526
    Location
    Ontario, Canada

    Default Re: Toolcat 5610 series F Pictures

    Thanks for the pics. It just looks really tough to get to in pics. Do you grab it from underneath the machine? The air filter and battery look very easy to get too. How is the servicing.....good?

    Is that how the rad sits or is it swivelled up? I've never seen a 5610 in person.

    I see in your signature you also have a V417. Those look very versatile too. How do you like it?

  3. #13
    Elite Member Xfaxman's Avatar
    Join Date
    Feb 2013
    Posts
    2,651
    Location
    Meridian, OK
    Tractor
    Bobcat V417 Toolcat 5610 F TORO+Loader

    Default Re: Toolcat 5610 series F Pictures

    Quote Originally Posted by Paystar View Post
    Thanks for the pics. It just looks really tough to get to in pics. Do you grab it from underneath the machine? The air filter and battery look very easy to get too. How is the servicing.....good?

    Is that how the rad sits or is it swivelled up? I've never seen a 5610 in person.

    I see in your signature you also have a V417. Those look very versatile too. How do you like it?
    I don't think the filter would be hard to get to, there is a lot of room around it, under there. I only have about 25 hours on it, so I am about halfway there.

    The radiator sets at that angle, all I did was open the hood and take the pictures. You can see the edge of the hood in the lower right corner of the last picture.

    The Bobcat V417 is an amazing machine. 75hp 4WD, 4wheel steer, 6' wide, skid steer QA, Lifts 4500 lbs 17 feet high. I sold my MF 240D 4WD when I got my first Versahandler.
    Here are some pictures of mine, for those that don't know what a V417 is.

    -p9290003-jpg-p9290004-jpg-pa010003-jpg-pa010016-jpg-p4180002-jpg-p4180014-jpg-cedar-tree-cutter-1-7-a-cedar-tree-cutter-1-jpg

  4. #14
    Platinum Member Paystar's Avatar
    Join Date
    Nov 2008
    Posts
    526
    Location
    Ontario, Canada

    Default Re: Toolcat 5610 series F Pictures

    Between the Toolcat and that V417, there's not much you can't do yourself.
    What a setup for brushhogging.....you can reach right across ditches, lol.

    Does the rad on your 5610 swing up for servicing, or is it fixed in place?


    Thanks for sharing the pics.
    I know who is watching. Not too worried about it.

  5. #15
    Elite Member Xfaxman's Avatar
    Join Date
    Feb 2013
    Posts
    2,651
    Location
    Meridian, OK
    Tractor
    Bobcat V417 Toolcat 5610 F TORO+Loader

    Default Re: Toolcat 5610 series F Pictures

    Quote Originally Posted by Paystar View Post
    Between the Toolcat and that V417, there's not much you can't do yourself.
    What a setup for brushhogging.....you can reach right across ditches, lol.

    Does the rad on your 5610 swing up for servicing, or is it fixed in place?

    Thanks for sharing the pics.
    The reason for reaching is, silt. Another foot forward and the tires disappear in the soft stuff, Like this:

    -stuck-jpg-stuck-10-jpg-stuck-14-jpg

    Don't know about the radiator, seems like I read that it swings up. Don't know what is under it.

  6. #16
    Platinum Member Paystar's Avatar
    Join Date
    Nov 2008
    Posts
    526
    Location
    Ontario, Canada

    Default Re: Toolcat 5610 series F Pictures

    I like the old MF too. Thanks again. Ya, I was just wondering if the rad flipped up to give more access to the engine. Like I said, I've seen them, but never looked at one up close.

  7. #17
    Elite Member WilliamBos's Avatar
    Join Date
    May 2004
    Posts
    4,478
    Location
    Innisfil, Ontario, Canada
    Tractor
    MF 1635 12x12 Powershuttle

    Default Re: Toolcat 5610 series F Pictures

    Anymore pics of the MF 240?? Love that tractor.
    Thanks,

    Will


    I do not care if someone's net nanny is watching!! You need to stop...

  8. #18
    Elite Member Xfaxman's Avatar
    Join Date
    Feb 2013
    Posts
    2,651
    Location
    Meridian, OK
    Tractor
    Bobcat V417 Toolcat 5610 F TORO+Loader

    Default Re: Toolcat 5610 series F Pictures

    Quote Originally Posted by Paystar View Post
    I like the old MF too. Thanks again. Ya, I was just wondering if the rad flipped up to give more access to the engine. Like I said, I've seen them, but never looked at one up close.
    The engine is up farther to the right side under the passenger seat. This is the access door, right below the "Bobcat".
    -pc190003-jpg

  9. #19
    Elite Member Xfaxman's Avatar
    Join Date
    Feb 2013
    Posts
    2,651
    Location
    Meridian, OK
    Tractor
    Bobcat V417 Toolcat 5610 F TORO+Loader

    Default Re: Toolcat 5610 series F Pictures

    Quote Originally Posted by WilliamBos View Post
    Anymore pics of the MF 240?? Love that tractor.
    Yep, Super gooder-un.
    -p3310004-jpg-p3310002-jpg-pb190026-jpg-p9190004-jpg

  10. #20
    Elite Member WilliamBos's Avatar
    Join Date
    May 2004
    Posts
    4,478
    Location
    Innisfil, Ontario, Canada
    Tractor
    MF 1635 12x12 Powershuttle

    Default Re: Toolcat 5610 series F Pictures

    Quote Originally Posted by Xfaxman View Post
    Yep, Super gooder-un.
    -p3310004-jpg-p3310002-jpg-pb190026-jpg-p9190004-jpg
    Thank you. A Coventry built gem. :-)
    Thanks,

    Will


    I do not care if someone's net nanny is watching!! You need to stop...

Page 2 of 5 FirstFirst 12345 LastLast

Similar Threads

  1. Toolcat 5610 vs CUT review
    By radman1 in forum Buying/Pricing/Comparisons
    Replies: 18
    Last Post: 08-29-2013, 03:50 PM
  2. Toolcat 5610 F-series has arrived.
    By hardhat in forum Toolcat
    Replies: 9
    Last Post: 05-04-2011, 01:51 PM
  3. Toolcat 5610 delivered
    By mdl6 in forum Toolcat
    Replies: 26
    Last Post: 09-14-2008, 05:18 PM
  4. Toolcat 5610 specs
    By radman1 in forum Toolcat
    Replies: 2
    Last Post: 08-16-2008, 04:54 PM
  5. Toolcat 5610 pictures
    By radman1 in forum Toolcat
    Replies: 12
    Last Post: 08-03-2008, 03:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.