Toolcat and V417

   / Toolcat and V417
  • Thread Starter
#11  
More pictures. Couple of dirt movers!

V417 with 6' bucket. Toolcat with 8' boxblade.

P3180021.JPG P3180028.JPG P3180018.JPG
 
   / Toolcat and V417
  • Thread Starter
#12  
Moving dirt from the edge of the pond.
P3200011.JPG P3200013.JPG

Filling the hole in the pasture.
P3200036.JPG P3200034.JPG

Leveling with the 8' boxblade on the Toolcat.
P3180001.JPG P3180003.JPG P3180005.JPG P3180008.JPG

Wheel packing with the V417.
P3200040.JPG P3200042.JPG
 
   / Toolcat and V417
  • Thread Starter
#13  
Hooked this crane scale on a dead tree to see how much lift power the V417 has.

P3280010.JPG P3280001 2700 pull.JPG

But the tree came up instead.

P3280002 277 wt.JPG P3280003.JPG P3280004.JPG
 
   / Toolcat and V417
  • Thread Starter
#15  
Used the stump bucket to push over a crooked tree. Didn't want to drag it down the driveway, so I chained it under the stump bucket, picked it up and backed down the driveway.

P7230001.JPG P7230002.JPG

35' long
P7230007.JPG
 
   / Toolcat and V417
  • Thread Starter
#16  
Installed this a year ago last month.

Pictures of the 7" monitor, with views from the front right camera.

Moving a round bale on 10-9-2013, can't see down low on the right.
PA090025.JPG

The monitor shows the driveway.
PA090027.JPG

Trees ahead.
PA090029.JPG

The monitor shows that I will miss the trunks.
PA090033.JPG
Good view, even with the sun shinning on part of the screen.

It switches to the rear camera when I pull the reverse lever.
PA090035.JPG PA090036.JPG PA090038.JPG

The front camera is over the right wheel.
P9020011.JPG P7200004.JPG

The rear camera is in the right tail light bracket.
P9020014.JPG P6210058.JPG
 
   / Toolcat and V417 #17  
That is still a cool setup. My salesman told me to stay away from the v417. Said it would ruin our relationship. How is it holding up for you?
 
   / Toolcat and V417
  • Thread Starter
#18  
That is still a cool setup. My salesman told me to stay away from the v417. Said it would ruin our relationship. How is it holding up for you?
So good so far! :thumbsup: It has 685 hours now. It had 44 hours when delivered 9-29-2010.
P9290004.JPG
It has never been that clean again! :D
 
   / Toolcat and V417
  • Thread Starter
#20  
Last edited:
 
Top