Results 1 to 3 of 3
08-11-2013, 01:34 PM #1
- Join Date
- Apr 2012
- toolcat 5600
I have a toolcat 5600. I have lost power steering and hydraulic function to lift arm and bed. I think it may be the pump, but am hoping it might be something more simple. Does anyone have any suggestions?
Last edited by croatian; 08-11-2013 at 02:09 PM.
08-12-2013, 09:49 AM #2
Does it still drive, wheels have power forward & reverse? If it does not drive, then check the drive belt. If wheels turn, then it is likely something in or at the gear pump(s).Dennis
CT225 w/7TL QA FEL, 60"tooth dirt bucket, 68" smooth bucket, Pallet Forks, Bale Spear. Hydrualic top llin, QH, 48 RC, 60" tiller, Angle blade, Landscape rake, Carry-all, Post hole auger.
08-12-2013, 11:43 AM #3
- Join Date
- Sep 2003
- JACKSONVILLE, FL
- Power-Trac 1445, KUBOTA B-9200HST
It probably has a separate implement pump, so check all the safety locks and then install a hyd gage in the loader circuit and see if you can develop any pressure.
A flow meter gage setup would be the best way to determine pump flow and pressure capability.J.J.
When I works, I works hard. When I sits and thinks, I goes to sleep.
Git er done.
3-Point Hitch hydralicsBy fastasme in forum New Holland Owning/OperatingReplies: 1Last Post: 10-02-2011, 09:05 PM
By welderboy14 in forum General Lawn & GardenReplies: 3Last Post: 04-22-2009, 05:26 PM
By welderboy14 in forum ProjectsReplies: 5Last Post: 04-21-2009, 09:43 PM
By welderboy14 in forum Parts/RepairsReplies: 1Last Post: 04-21-2009, 04:06 PM
By Anonymous Poster in forum Kubota Owning/OperatingReplies: 3Last Post: 07-06-2001, 08:08 AM