Page 17 of 26 FirstFirst ... 714151617181920 ... LastLast
Results 161 to 170 of 252
  1. #161
    Veteran Member SSdoxie's Avatar
    Join Date
    Jun 2010
    Posts
    2,103
    Location
    Cumberland Plateau, TN
    Tractor
    Bobcat CT225

    Default Re: If you have Toolcat questions, ask them here...

    Quote Originally Posted by BlackIrish View Post
    We are thinking fuel pump ? sensor ?

    Does anyone know of any diagnostic program, ideally on Ipad, that will communicate with toolcats and skidsteers ?
    The engine RPM is mechanical control only, no sensor input. So problem is likely fuel or air supply.

    The diagnostic software is Bobcat specific, works only on microsoft (Windows) based program.
    Dennis

    CT225 w/7TL QA FEL, 60"tooth dirt bucket, 68" smooth bucket, Pallet Forks, Bale Spear. Hydrualic top llin, QH, 48 RC, 60" tiller, Angle blade, Landscape rake, Carry-all, Post hole auger.

  2. #162
    New Member
    Join Date
    Feb 2012
    Posts
    5
    Location
    Ottawa,Ontario
    Tractor
    Many

    Default Re: If you have Toolcat questions, ask them here...

    Quote Originally Posted by SSdoxie View Post
    The engine RPM is mechanical control only, no sensor input. So problem is likely fuel or air supply.

    The diagnostic software is Bobcat specific, works only on microsoft (Windows) based program.
    Do u know where I can get the software from ?

  3. #163
    New Member
    Join Date
    Aug 2012
    Posts
    11
    Location
    Plainfield
    Tractor
    l120

    Default Re: If you have Toolcat questions, ask them here...

    I just purchased a 2004 Toolcat and am trying to work out the bugs. The two issues that I am currently work on are:
    1. When I line up the wheels and get the lights to turn on for the 4 wheel steer and click the 4 wheel steer button, the steering wheel locks up and I cannot turn it. Has anybody had this experience before?
    2. I have tried pushing the high flow button (with no attachment hooked to hydraulics) and as soon as I let off the button the light shuts off. Do I need to have an attachment hooked up to get this function to work?

  4. #164
    Elite Member Xfaxman's Avatar
    Join Date
    Feb 2013
    Posts
    2,861
    Location
    Meridian, OK
    Tractor
    Bobcat V417 Toolcat 5610 F TORO+Loader

    Default Re: If you have Toolcat questions, ask them here...

    For number 2, did you turn on "Aux Hyd" first?

    Manuals are available, you need the serial number.

    Bobcat Store: 5600 Utility Work Machine

  5. #165
    New Member
    Join Date
    Feb 2013
    Posts
    3
    Location
    Regina, Sk
    Tractor
    bobcat toolcat 5610 2009

    Default Re: If you have Toolcat questions, ask them here...

    #1 - never heard of this before.
    #2 - Attachment needs to be hooked up first, then press the Aux Hyd, then press High Flow. If the machine sences that you are connected to a std flow item high flow will disengage.

  6. #166
    New Member
    Join Date
    Aug 2012
    Posts
    9
    Location
    Oregon, WI
    Tractor
    04 Toolcat 500k 773 #7

    Default Re: If you have Toolcat questions, ask them here...

    I think you sent this to the wrong member

  7. #167
    New Member
    Join Date
    Feb 2012
    Posts
    5
    Location
    Ottawa,Ontario
    Tractor
    Many

    Default Re: If you have Toolcat questions, ask them here...

    Quote Originally Posted by SSdoxie View Post
    The engine RPM is mechanical control only, no sensor input. So problem is likely fuel or air supply.

    The diagnostic software is Bobcat specific, works only on microsoft (Windows) based program.
    Roll pin on throttle linkage was pooched. Air filters replaced.

    Up and running.

    Is this diagnostic software available for purchase somewhere ?

  8. #168
    New Member
    Join Date
    Aug 2012
    Posts
    11
    Location
    Plainfield
    Tractor
    l120

    Default Re: If you have Toolcat questions, ask them here...

    I have not had a chance to work any further on my Toolcat so I'm still where I was in my last post. I will try hooking up an attachment and using the high flow but I am still cannot get 4 wheel steer to work. Any help with the steering would be appreciated.

  9. #169
    New Member
    Join Date
    Feb 2013
    Posts
    2
    Location
    clay city,in
    Tractor
    toolcat 5600

    Default Re: If you have Toolcat questions, ask them here...

    Does anybody know of a third party source
    for toolcat 5600 shock absorbers? Bobcat
    wants $480 a piece for these!!!

  10. #170
    Elite Member Xfaxman's Avatar
    Join Date
    Feb 2013
    Posts
    2,861
    Location
    Meridian, OK
    Tractor
    Bobcat V417 Toolcat 5610 F TORO+Loader

    Default Re: If you have Toolcat questions, ask them here...

    Quote Originally Posted by charlerupp View Post
    Does anybody know of a third party source
    for toolcat 5600 shock absorbers? Bobcat
    wants $480 a piece for these!!!
    That must be including the spring.

    Why do you need to replace it?

    What series or year is it?

Page 17 of 26 FirstFirst ... 714151617181920 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.