Results 1 to 2 of 2
  1. #1
    Bronze Member
    Join Date
    Mar 2007
    Posts
    88
    Location
    New England
    Tractor
    02 NH Tn 75D-06 Kubota 105X-14 Toolcat 5600G-13 Kubota Excavator U35

    Default Bobcat is listing attachments too heavy for toolcat

    The Brushcat is 200 lbs. heavier than the 1500 lbs. the machine is rated to carry??
    Brushcat Rotary Cutter Attachment - Bobcat Company
    The Flail mower is 130 lbs more
    Flail Cutter Attachment - Bobcat Company
    The high flow chipper is 160 lbs more
    Chipper Attachment - Bobcat Company

  2. #2
    Silver Member
    Join Date
    Apr 2006
    Posts
    231
    Location
    North WI
    Tractor
    2006 Toolcat turbo

    Default Re: Bobcat is listing attachments too heavy for toolcat

    what i have been told on the brushcat is that the 60 inch but not 72 inch is ok for the tc. it's wt is on the ground when working and the 72 inch is not approved because it is too heavy to lift upgright for service vs the 60.

    i am going to demo a older 60inch to see if the tc can handle it well as i have a lot of turns on my roads i would use it for mowing. the new model has rollers on either side on the front as well as the large roller on the back to allow the attachment to rest on the ground - the tc basically pushes it and steers but i would not think it would be a good idea to lift it for extended periods. it is heavy - my 240 72 blower is heavy (i think about 1200lbs) and it rocks the tc when on if not on the ground.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.