|
|
|
|
|
|||||||||||||||
|
|
|||||||||||||||
|
|
#11 (permalink) | |
|
Platinum Member
Join Date: Apr 2007
Location: East TN
Posts: 786
|
Quote:
Best of luck to your LB7 engine. When it dumps while out on the road, it's not a pretty sight. The spillage gets all in the wiring harnesses, all under the truck throughout the entire undercarriage and within days, you'll see the frame turn to a rust coated bare metal. The diesel eats all of the coating off. This machine is a 2001 LB7. I traded it at 58k on the second set. Got a 2002 LB7. Traded it at 98k and it was on it's 4th set. The real pain is not the failure, but finding reliable replacement parts. an experienced Duramax mechanic, GM's willingness to cooperate, and the many weeks / months (literally) of downtime while it's in the shop. Parts are slow and now hard to find. Happy dieseling... I wouldn't have another one if you paid me to take it. I bought an LBZ last year 2007. So far, so good. Mileage is like always in any of them that I have owned... ~15 MPG. . ![]()
__________________
** B7800 ** John 3:16 Vice-President of the RoyJackson Fan Club. Last edited by crbr; 10-10-2008 at 11:08 PM. |
|
|
|
|
|
|
#12 (permalink) | |
|
Silver Member
Join Date: Feb 2006
Location: Lindrith, NM
Posts: 110
|
Quote:
|
|
|
|
|
|
|
#13 (permalink) |
|
Silver Member
Join Date: Mar 2008
Posts: 114
|
I don't own one but did make a 900 mile trip driving one last month. Pulling a 18ft 10k bumper pull trailer empty we got 14. With 3 Polaris Ranger XP's (one in bed of truck, two on trailer) we got 8 coming home.
|
|
|
|
|
|
#14 (permalink) |
|
Member
Join Date: Apr 2008
Location: East Metro MSP
Posts: 29
|
FWIW I've had an 05 duramax cc/sb that i bought used at 36k miles 1.5 years ago and I just turned 75k. Averaging 16.5 city and depending on load 18-22 highway. Now mind you I'm sometimes driving like grandma to get up to highway speed (68-70) and I've found that iIt helps to keep it right around the 2k rpm's when on cruise or when accelerating from stops. I also leave the DIC on MPG setting so I can stay aware if I'm hitting the turbo too much. Other factors usually include where I got my fuel, truck warmed up and outside temperature/wind direction. With winter fuels right around the corner I'll take a 20% hit on economy. But all factors considered I'm happy since my former GMC 6.0 was consistently 10-12 mpg. So the duramax is my hybrid.
__________________
2008 JD 3520 OS, 300CX, 485 BH, Forks, HD Bucket 1986 JD 650; Buhler 60" Tiller; Agri-Farm 48" Rough Cutter; 1978 JD140 with 42" deck meticulously rebuilt by my father and passed down to me. RIP |
|
|
|
|
|
#15 (permalink) |
|
Platinum Member
Join Date: Mar 2005
Location: Bedford, VA
Posts: 863
|
I wonder if we are comparing apples and apples here?? No one has mentioned what axle ratio they are running.. Someone running a 4.10 is going to get a whole lot less mileage than the 3.5x rears...
My dads '97 Dodge/cummins 3500, AT, 4x2 gets a whole lot better mpg than my 2002 Dodge/cummins 2500, AT, 4x4.. I have a 3.5x rear, but im not sure what the '97 has.. just a thought Brian
__________________
Bedford, VA 2320 w/ 62D MMM, 200CX FEL, Pats EZ Change, LX4 Cutter - (Amsoil in transmission and front axle) Co-owner (with my father) of John Deere 790, 30 HP, 4x4, 513 cutter, 70 FEL 2002 Dodge Ram 2500 Quad Cab w/ 24v Cummins, 4x4 - (Amsoil in f&r diff's) |
|
|
|
|
|
#16 (permalink) | |
|
Silver Member
Join Date: Feb 2006
Location: Chardon Ohio
Posts: 228
|
Quote:
|
|
|
|
|
|
|
#17 (permalink) | |
|
Silver Member
Join Date: Feb 2006
Location: Chardon Ohio
Posts: 228
|
Quote:
|
|
|
|
|
|
|
#18 (permalink) | |
|
Super Member
Join Date: Sep 2000
Location: WI
Posts: 5,437
|
Quote:
My 03 2500 has 75k miles and has averaged 17.778 since new. Highest mpg has been 22.51 and lowest has been 10.92. It tows 9-10k about 20% of the miles. In the winter you NEED to use the front cover. A hot engine runs better and uses a LOT less fuel. If you are getting low mpg's, check your disc brakes. In salty areas, the caliper sliders stick and drag. There is so much power, you won't notice it, but can lose 1-4 mpg. The truck runs best below 2000 rpm. At 75 mph you will get about 3-5 mpg less than at 55. At least mine does! Last, you need to drive like a grey haired granny. You need to start slowly and let the truck shift by lifting the peddle so you get to the highest gear as quick as possible.
__________________
|
|
|
|
|
|
|
#19 (permalink) |
|
Silver Member
Join Date: Feb 2006
Location: Chardon Ohio
Posts: 228
|
Just completed a trip from Chardon Oh to Salt Fork Oh. yesterday. The truck said 22.1 mpg, which is usualy not dead accurate, but in the ballpark. Normaly hand calculating shows the truck reading 2 to 5 tenthes better than actual. I have not gotten fuel yet, so have not had a chance to hand calculate it. I will fill it up tomorrow and post the results of hand calculation.
![]() |
|
|
|
|
|
#20 (permalink) |
|
Silver Member
Join Date: Feb 2008
Location: Eugene, Oregon
Posts: 167
|
Dad's just doing his 3000/6month oil change this week, so we don't have the enging broke in yet. But on his 2008 Dodge Ram with 6.7 seems to get 16 mph running around, 13-15 pulling the 28' 5'er, and we have seen 19-20 on freeway trips
2wd, midrange rear end
__________________
Sackett aka "Steve"
TSgt, USAF Ret. 1981-2001 2008 Montana 4344HST 4' Brush Hog; 6' rear blade; 6' box blade "Thanks for the tractor Rick" In memory of my brother Richard A. Hansen 1961-2008 SSgt, USAF Ret. 1980-2000 |
|
|
|
![]() |
||
| Thread Tools | |
| Display Modes | |
|
|
|
||||||||||||||||||||||
| About TractorByNet.com | Terms of Service | Advertise | © 2008 TractorByNet.com |