Results 1 to 10 of 35
-
10-21-2011, 11:15 PM #1
I bought a Dodge today.
I have a post below about buying a Dodge Diesel. I bought one today. Its a 2004, Quad Cab, 3/4 ton, short bed, 24 valve 5.9l diesel. It has about 105,000 miles on it, silver in color, 4.10 rear end. I've only put a few miles on it but the computer is showing around 20mpg. It has exhaust on it and and edge chip on it. I'll have to read about the edge chips since I don't know much about them. We have a busy weekend planned so I'll try and post some pics next week.
Dave,
BX2350
-
10-22-2011, 01:15 AM #2Super Member
- Join Date
- Dec 2008
- Posts
- 5,255
- Location
- Texas -from the brush and pear to the piney woods
- Tractor
- 110 TLB
Re: I bought a Dodge today.
Alright, man! Glad to hear it. Look forward to the pics!
"“The budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed lest Rome becomes bankrupt. People must again learn to work, instead of living on public assistance.” Cicero — 55 BC
Obama= Jobs lost by the thousands, reinvented by the hundreds.
The Second Amendment. Defender of the rest.
-
10-22-2011, 04:23 AM #3Veteran Member
- Join Date
- Sep 2004
- Posts
- 1,399
- Location
- Garrett County Md. ( Western Md.)
- Tractor
- Kubota MX5100
Re: I bought a Dodge today.
I have the same truck but don't have the 4.10's. I do a bit too
much freeway driving for those.
I also have the Edge Juice with Attitude. If i turn my box all the way up it makes some impressive horsepower but makes my clutch slip a bit.Father, GNCC racer, KTM rider, Bow hunter, Farm owner.
Kubota MX5100
Dodge 2500 CTD
Yamaha YZ 250
-
10-22-2011, 06:15 AM #4
-
10-22-2011, 06:19 AM #5
Re: I bought a Dodge today.
congrats on the truck
looking forward to some pics".........there is only one way to find out."
"Ok, hold my beer and watch this.........."
Ford 5500 Backhoe
Kubota L3400GST W/LA463 FEL
2005 Dodge 3500 4x4 Diesel
8N Rebuilt and restored
Bushhog 105 and 306 cutters
JD 261 3PH mower
3 Homemade wood hauling trailers
Dolmar 7900
Dolmar 6400 84cc ported BB kit and Muffler Modded
Sachs-Dolmar 120SI Ported
(4) Sachs-Dolmar 116SI Ported
Dolmar PS540
Sachs-Dolmar 115i
Sachs-Dolmar 117
Sachs-Dolmar 112
Dolmar 350 "dads"
-
10-22-2011, 07:22 AM #6
-
10-22-2011, 08:17 AM #7
Re: I bought a Dodge today.
Very nice! I would love to have a 2004-2007 5.9l Cummins RAM.

4.10 rear end and 20 mpg.
If that is true when hand calculated then it's very impressive!Derek
Kioti CK20HST
KL120 FEL // KB2365 BH // 60" JRW 3ph snowblower // 48" HD Boxblade
Sims-Cab Depot heated cab
Originally Posted by DiamondPilot
-
10-22-2011, 08:37 AM #8
Re: I bought a Dodge today.
I traded in a GMC 1/2 ton 4x4 regular cab 3.73 gears and I usually average about 13mpg going back and forth to work. When I test drove the Dodge yesterday, I reset the trip computer and got 22 mpg driving the same route. When I went back to buy the truck with my wife, we were in a hurry going back home since we had my daughters swim meet to go to and I drove it pretty hard and the computer still showed 20.0 when I got home.
The Edge chip has a date of early 2005 on it and there is no way to change anything on it. It just plugs in and does its thing. It has a pinstripe on it that is strands of barb wire instead of regular pin stripe. I plan on removing that. It also has a sticker on the tailgate that says "DODGE MAKES IT, CUMMINS SHAKES IT". I think that will have to come off also.Dave,
BX2350
-
10-22-2011, 04:17 PM #9
-
10-22-2011, 04:24 PM #10Elite Member
- Join Date
- Jul 2006
- Posts
- 4,345
- Location
- Northwest, WA
Re: I bought a Dodge today.
Very awesome, welcome to the Cummins family.
I'm going to bet removing that pinstripe is going to leave a ghost image in the paint.
Similar Threads
-
bought a tlb2310 today
By Chooglin in forum Massey Ferguson Buying/PricingReplies: 15Last Post: 04-20-2011, 08:13 PM -
Bought a New Kubota RTV1140CPX Today
By JOHNTHOMAS in forum ATVs & Utility VehiclesReplies: 8Last Post: 11-29-2010, 12:29 AM -
Look what i bought today
By iternawheel in forum IsekiReplies: 17Last Post: 11-24-2010, 01:02 PM -
Bought a 1532 today
By gary d in forum Massey Ferguson Buying/PricingReplies: 10Last Post: 11-18-2010, 10:47 PM -
Bought TC29D today
By bher in forum New Holland Buying/PricingReplies: 2Last Post: 10-26-2001, 09:02 PM


Reply With Quote

