Everlast Welders - Welders and Plasma Cutters by Everlast

[Shield Arc]

The rail car place locally has "disallowed" 6010 now, and they must do 7018 all the way out. I have found a lot of strange standards lately with this. They have cited "insurance" won't allow anything weaker than the strongest rod. Other customers have told me some strange stuff as well. But as far as I know it's still 6010/6011 root, and 7018 the rest of the way, ...What I may do, is do tig root, 7018 pass and cap, since my material may be limited.

Mark it's been ages since I did any 7018 open root welding. So this morning I grabbed some 4-inch sch 80 pipe. Placed a 1/16-inch land, and used a 5/64-inch drill bit for the gap. 3/32-inch 7018, DCEN at 60-amps. 5-G uphill. My tacks have a lot more reenforcement than the weld. Maybe because I make the tacks in the flat position, and gravity is helping more than it should.


The last picture is a 6-G I did years ago.

[Mark @ Everlast]

Guys, our 210 EXT PowerTIG is now fully in stock. Give me a call for VERY special pricing shipped. This is one of our best TIGs yet, and it also has excellent features for stick welding with hot start adjustment for time and intensity, as well as arc force control. It's a full digital TIG with gapless HF ignition. It has wave form control, a special additional pulse for AC and has been well received so far. Everything is adjustable in this unit.

[jake98]

Love the PowerPlasma70. Not sayin I know how to use it, but for me, this is a good cut. 3/4" hot roll.

[Mark @ Everlast]

Way to go Jake. Work with your air pressure, stand off and speed to improve dross. Have you got a separate air dryer?

[jake98]

I have a QC-3 on the line. Seems to work good, it gets obvious pretty quick when it needs a cartridge. I was surprised how fast it cut the 3/4", figured it would be a lot slower process. Have to get positioned so you can watch the stream too, wish I had more time to get good with it.. This is a mount for a winch I'm putting on the front of my Kioti. Plunge cutting the slot for the cable was on the rough(er) side, freehand, so I'm cleaning it up here.

[Mark @ Everlast]

Guys,
Just got word we are giving a super deal for all TBN'ers on a few PA 160 stick welders we had made up by the factory as a regular model. Edit: This is the 160 stick welder only without the sth.

PRICE?

250.00 SHIPPED.
WHILE SUPPLIES LAST OR CHRISTMAS COMES.

[crackerjack222]

Guys,
Just got word we are giving a super deal for all TBN'ers on the PA 160 STH dual voltage stick tig welder. This 160 amp unit has good stick arc performance, along with high frequency start, built in gas solenoid, and TIG package with carry case.

PRICE?

250.00 SHIPPED.
WHILE SUPPLIES LAST OR CHRISTMAS COMES.

Regular price is 489.00 PLUS shipping. This amounts to over 50% off. Don't worry, price will resume normal after Christmas and stock will be replenished, but if you have been waiting for our best deal ever, this is it.

Here are a couple of videos either reviewing or welding with it it by Jody Collier of Weldingtipsandtricks.com. Affordable Tig Welder Project - YouTube
Stick Welding 2 inch Pipe Cover Pass - 6g Pipe Welding Test 2" Schedule 80 - YouTube

Mark, I just bought one at near the regular price, just received it yesterday, do I get the discounted price?

[Mark @ Everlast]

If you had bought itthrough me you would have received a 20% Thanksgiving/ Holiday discount for being on TBN.
But that is the nature of a sale. They aren't retroactive. But, please see the edit. The unit is actually the regular 160, which is a limited run

[shaley]

I need a Plasma cutter but just don't know who to call.

[Mark @ Everlast]

See below my name. That's My number or pm me and I'll send you my cell.