Results 1 to 4 of 4
  1. #1
    Gold Member
    Join Date
    Aug 2007
    Posts
    339
    Location
    FL panhandle
    Tractor
    Yanmar 2210D

    Default Slow moving Vehicle sign

    Guys - How R you putting your SMV signs on - As far as I can tell the only choices are into the seat or into the Rollbar - And I don't really want to drill into either of those. Thanks

  2. #2
    Gold Member
    Join Date
    Apr 2002
    Posts
    322
    Location
    jackson tn
    Tractor
    Allis Chalmers 416S John Deere LX280, John Deere Z225 zero turn yanmar 1401 , Oliver 550 Special, Oliver 75 Lawn Tractor, New Holland 3930 4WD, Mitsubishi BDF2 Dozer

    Default Re: Slow moving Vehicle sign

    I placed my on the back of my seat. If the back of the seat is smooth you can get a vinyl one that will adhere to the seat without having to drill holes. By no means would I drill holes into the ROPS.
    red

  3. #3
    Gold Member
    Join Date
    Aug 2007
    Posts
    339
    Location
    FL panhandle
    Tractor
    Yanmar 2210D

    Default Re: Slow moving Vehicle sign

    I agree - I already bought one that does not adhere though - Maybe a hose clamp around the Rops and an L bracket though?

    Thanks

  4. #4
    Gold Member
    Join Date
    Aug 2007
    Posts
    339
    Location
    FL panhandle
    Tractor
    Yanmar 2210D

    Default Re: Slow moving Vehicle sign

    Well today I found a couple of threaded Eye bolts and stuck those in the sign - Then was able to tie wrap to those to secure the sign to the left side of the roll bar - So, I didn't have to drill in the roll bar or in the seat

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.