tallyho8
Elite Member
- Joined
- Aug 1, 2004
- Messages
- 4,998
- Tractor
- Kubota L4400, Kubota ZD326
When it started slowing down a lot, I would loosen the line to each injector one at a time. Each time it would slow down more and kill. I noticed no difference from one injector to the other.
It does seem to be blowing a little more blue smoke out the exhaust when running at full speed but not noticible at lower speeds. No smoke comes out the crankcase breather.
And yes, it has a plastic fuel bowl, not a glass one, and I have changed the o-ring. I even put a can of fuel on the hood and ran a line down from the can to the bleeder valve on the injector pump, eliminating the fuel filter assembly and tank and hoses and it did the same thing.
My next decision is whether to use a 5 pound hammer or a 7 pound hammer on it.
I searched many old threads looking for something similar and almost all threads ended without the person telling what they did to correct the situation, if if was corrected.
It does seem to be blowing a little more blue smoke out the exhaust when running at full speed but not noticible at lower speeds. No smoke comes out the crankcase breather.
And yes, it has a plastic fuel bowl, not a glass one, and I have changed the o-ring. I even put a can of fuel on the hood and ran a line down from the can to the bleeder valve on the injector pump, eliminating the fuel filter assembly and tank and hoses and it did the same thing.
My next decision is whether to use a 5 pound hammer or a 7 pound hammer on it.
I searched many old threads looking for something similar and almost all threads ended without the person telling what they did to correct the situation, if if was corrected.