Results 1 to 3 of 3
  1. #1

    Join Date
    Mar 2002
    Posts
    77
    Location
    southern ohio
    Tractor
    YM1802D

    Default foot throttle and hand throttle

    talk about a pain in adjustment.. when I got tractor foot throttle would stick. so I took it all apart and cleaned and put back to gether, foot throttle worked great,, but then the hand throttle would not stay in position, it would creep down when in use.. had to keep shift cover off and keep looseing and tightening till I got it right.. to bad it does just not just tighten up and its there..

  2. #2
    Silver Member vongiese's Avatar
    Join Date
    Mar 2002
    Posts
    143
    Location
    Montana
    Tractor
    Yanmar 2210D

    Default Re: foot throttle and hand throttle

    You have an 1802d? I believe you can tighten down the pivot point of the hand throttle. I'm sure one of the experts will chime in here and be more specific.

  3. #3

    Join Date
    Mar 2002
    Posts
    77
    Location
    southern ohio
    Tractor
    YM1802D

    Default Re: foot throttle and hand throttle

    yep you tighten the pivot point for the hand and foot throttle,, the trick is getting it right.. not to tight not to loose
    wish there was a torq spec.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.