misterbadger
New member
- Joined
- Sep 17, 2010
- Messages
- 15
- Tractor
- Yanmar 165D
165D - there is a 7/8" diameter x 16" long rod or pin that the lower link arms of the 3PH attach to. It runs across the tractor, just behind the drawbolt receiver, and has a bracket on each side that attaches it to the differential case, except on my rig. There are no bolts holding it to one side of the case, and the pin has bent to where I can't line up the bracket and the case holes to rebolt. I'll probably have to cut it to be able to remove. Is this a standard part? Does it have a name? Available from one of the supply places? I'm able to get a hunk of 7/8" stock and make a replacement, if needed, but would feel foolish investing a lot of time just to find it's available from TSC or some other parts house had I been smart enough to know what to ask for.
Thanks for any advice - I'd be lost without this forum! Actually, I'm pretty much lost anyhow...
Thanks for any advice - I'd be lost without this forum! Actually, I'm pretty much lost anyhow...