284 International
Veteran Member
- Joined
- Jun 28, 2010
- Messages
- 1,466
- Tractor
- International Harvester 284
I was going through some of my notes, and found a chart I had started keeping track of some time ago, documenting PTO speeds for different grey market tractors I own or might encounter. I thought it might be useful to others if I put it up.
I was derelict in my responsibility to keep track of who said what, but most are from Danny Parker, Hoye, Len Sheaffer, and Wayne at LMTC. I also know I have read statements by Mickey FX, Winston, and Service Department Vic. If anybody knows or recognizes the source of the data I'll be appreciative and give credit to the original source. Any additional machines, contrary or supplemental data, or whatever, is welcome. It will be obvious that I simply cut-and-pasted from a Word document to here, after clipping excerpts from forum posts. I apologize for the subsequent appearance.
PTO speeds
YM155: 540 & 770 RPM
YM169: 540 & 710
1401D: 1st 540 2nd 1000 3rd Engine speed or, per Danny, 1st 520
2nd 862
3rd 1300
YM1500
1st 639 rpm
2nd 828 rpm
3rd 1097 rpm
@ 2400 rpm
1510:
533
837
1326
1610: 588, 769, 1111.
YM1700 w/ engine @ 2200 rpm
1: 540
2: 1000
3: 2200 (engine speed)
YM2000: 588,730,1260
YMG2000
#1 550
#2 784
#3 1096
YM2002D PTO
1st 550
2nd 784
3rd 1096
2210
1st= 547
2nd=700
3rd=929
4th=1232
at an engine speed of around 2200rpm, though according to Ginormous' operator manual:
YM2210 w/ engine @ 2200 rpm
1: 540
2: 1000
3: 2200 (engine speed)
4: 2400
1720 573-758-1136
1810 1st 550 rpm 2nd 784 rpm 3rd 1096 rpm.
1820 550-784-1096
2020-2220-2420 566-765-978-1163
2620-2820 550-677-1000-1184
3000: 542,685,1005,1268.
3220 4220 546-686-1024-1221
FX24D
#1 574
#2 699
#3 958
#4 1293
Other, non-Yanmar brands:
Mitsubishi/Satoh:
S370 Beaver: 537, 791, 1297, according to brochure
"S470 buck: According to the manual, at 2700 rpm:
First..........565
Second......832
Third........1,000
Standard PTO speed: 540 pto rpm/2,580 engine rpm (first)
1,000 pto rpm/1979 engine rpm (third)"
Buck is covered in same manual and is very similar to ST1450
D1850 1-540
2-752 rpm
3-997 rpm
4-1282 rpm
(Unknown quotes)
"According to my owner's manual for the S-370D, standard PTO speeds are 517, 762 and 1249 @ 2700 engine rpm. Optional speeds are 537, 791 and 1297 @ 2700 rpm. Optional speeds are with the 1 3/8 inch PTO shaft vs. the standard 0.98 inch"
"MT372 manual states it 2 ways:
1st 565 rpm/2700 engine rpm
2nd 832 rpm/2700 engine rpm
3rd 1364 rpm/2700 engine rpm
or, in the more coventional fashion:
540 rpm/2580 engine rpm
1000 rpm/1979 engine rpm"
D2300:
1 - 555 rpm
2 - 774 rpm
3 - 1026 rpm
4 - 1320 rpm
"Mt160 as MT180,and D's
The manual says;
1st=623@2700rpm(engine)
2nd=919@ "
3rd=1506 "
also says;
1st=540rpm@2660
3rd=1000 @1793
(no mention of 2nd)"
Kubota:
B5100E only has a 2 speed PTO with 603 and 963 rpm@3000 engine rpm
B6000
1st 560
2nd 840
3rd 1350
at 2700 engine RPM
L1500:
PTO SPEED 1- 597 RPM @2800RPM
#2- 850 @2800
#3- 1185 @ 2800
#4- 1371 @ 2800 (From Service Dept. Vic @ Orangetractortalks)
B7100
514/786/1498 rpm
I was derelict in my responsibility to keep track of who said what, but most are from Danny Parker, Hoye, Len Sheaffer, and Wayne at LMTC. I also know I have read statements by Mickey FX, Winston, and Service Department Vic. If anybody knows or recognizes the source of the data I'll be appreciative and give credit to the original source. Any additional machines, contrary or supplemental data, or whatever, is welcome. It will be obvious that I simply cut-and-pasted from a Word document to here, after clipping excerpts from forum posts. I apologize for the subsequent appearance.
PTO speeds
YM155: 540 & 770 RPM
YM169: 540 & 710
1401D: 1st 540 2nd 1000 3rd Engine speed or, per Danny, 1st 520
2nd 862
3rd 1300
YM1500
1st 639 rpm
2nd 828 rpm
3rd 1097 rpm
@ 2400 rpm
1510:
533
837
1326
1610: 588, 769, 1111.
YM1700 w/ engine @ 2200 rpm
1: 540
2: 1000
3: 2200 (engine speed)
YM2000: 588,730,1260
YMG2000
#1 550
#2 784
#3 1096
YM2002D PTO
1st 550
2nd 784
3rd 1096
2210
1st= 547
2nd=700
3rd=929
4th=1232
at an engine speed of around 2200rpm, though according to Ginormous' operator manual:
YM2210 w/ engine @ 2200 rpm
1: 540
2: 1000
3: 2200 (engine speed)
4: 2400
1720 573-758-1136
1810 1st 550 rpm 2nd 784 rpm 3rd 1096 rpm.
1820 550-784-1096
2020-2220-2420 566-765-978-1163
2620-2820 550-677-1000-1184
3000: 542,685,1005,1268.
3220 4220 546-686-1024-1221
FX24D
#1 574
#2 699
#3 958
#4 1293
Other, non-Yanmar brands:
Mitsubishi/Satoh:
S370 Beaver: 537, 791, 1297, according to brochure
"S470 buck: According to the manual, at 2700 rpm:
First..........565
Second......832
Third........1,000
Standard PTO speed: 540 pto rpm/2,580 engine rpm (first)
1,000 pto rpm/1979 engine rpm (third)"
Buck is covered in same manual and is very similar to ST1450
D1850 1-540
2-752 rpm
3-997 rpm
4-1282 rpm
(Unknown quotes)
"According to my owner's manual for the S-370D, standard PTO speeds are 517, 762 and 1249 @ 2700 engine rpm. Optional speeds are 537, 791 and 1297 @ 2700 rpm. Optional speeds are with the 1 3/8 inch PTO shaft vs. the standard 0.98 inch"
"MT372 manual states it 2 ways:
1st 565 rpm/2700 engine rpm
2nd 832 rpm/2700 engine rpm
3rd 1364 rpm/2700 engine rpm
or, in the more coventional fashion:
540 rpm/2580 engine rpm
1000 rpm/1979 engine rpm"
D2300:
1 - 555 rpm
2 - 774 rpm
3 - 1026 rpm
4 - 1320 rpm
"Mt160 as MT180,and D's
The manual says;
1st=623@2700rpm(engine)
2nd=919@ "
3rd=1506 "
also says;
1st=540rpm@2660
3rd=1000 @1793
(no mention of 2nd)"
Kubota:
B5100E only has a 2 speed PTO with 603 and 963 rpm@3000 engine rpm
B6000
1st 560
2nd 840
3rd 1350
at 2700 engine RPM
L1500:
PTO SPEED 1- 597 RPM @2800RPM
#2- 850 @2800
#3- 1185 @ 2800
#4- 1371 @ 2800 (From Service Dept. Vic @ Orangetractortalks)
B7100
514/786/1498 rpm
Last edited: