Results 1 to 2 of 2
-
11-17-2012, 05:40 PM #1New Member
- Join Date
- Nov 2006
- Posts
- 7
EX450
Hi,
I'm contemplating buying an EX450 TL in the very near future. I'd like to hear from current/prior owners on the following:
1) How was the loader as far as capacity and durability?
2) How was the transmission with shuttle shift?
3) Any warranty issues?
4) Would you buy it again?
-
11-19-2012, 08:58 PM #2
Re: EX450
Welcome to TBN.
I don't have an Ex450 but there are a few people on the board that do that will hopefully answer your questions. My experience with my ccy Sc2400 has been great. The dealer I bought it from, Knightdale Tractor in Knightdale, NC, has been great also. When I've ordered parts they are normally at the dealer in a few days and the dealer has nothing but good things to say about Yanmar. So regarding your would you buy it again question, I would buy another Yanmar in a heart beat.
Here's a thread on a member that bought a Ex450:
http://www.tractorbynet.com/forums/c...ml#post1848723
One thing to look at between the Lx450 and the Ex450 is the loader. The CL600 that comes on the Lx450 is far more superior to the CL400 that is on the Ex450. I'm not sure what the difference in the tractor is but it looks like the CL600 is a better loader.
Specs on Ex450
http://www.yanmartractor.com/pdfs/ex450.pdf
Specs on Lx450
http://www.yanmartractor.com/pdfs/lx_series.pdfCCY Sc2400
Woods PHD35
Very Old 60" BB
Harbor Freight QH
EF115 Flail Mower
BX42s Chipper
County Line Carry-All
County Line (Tarter Gate) 48" Tiller
Homemade 60" Dethatcher
Similar Threads
-
ex450 - Owners speak up!
By jfccac in forum Cub Cadet Yanmar & CUTsReplies: 1Last Post: 11-22-2012, 09:50 AM -
Loader EX450
By Eyecatcher in forum Cub Cadet Yanmar & CUTsReplies: 3Last Post: 04-13-2012, 08:00 AM -
ex450!!!!
By tbalz in forum Cub Cadet Yanmar & CUTsReplies: 2Last Post: 01-20-2011, 08:18 AM -
New EX450 Owner
By tbalz in forum Cub Cadet Yanmar & CUTsReplies: 29Last Post: 08-05-2010, 10:01 PM -
EX450 or EX3200?
By robertwhite in forum Cub Cadet Yanmar & CUTsReplies: 0Last Post: 03-22-2010, 09:25 PM


Reply With Quote
