Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 28
  1. #11
    Gold Member
    Approved Advertiser

    Join Date
    Jul 2002
    Posts
    744
    Location
    North Texas
    Tractor
    Yanmar

    Default Re: Hoye Power Steering

    Would never have guessed they would "hydro lock" ,
    No, it is not locked. Those small cylinders like that are just really tight fitting and I just have not had a lot of time to go mess with it. We did get it to move out some by clamping one end in a vise and standing on the other end but the phones started ringing again and we are short handed this week. You would think "oh just pull the rod out and measure"... not so much . We can (and will) get it out & measured. Just not the 5 minute project I anticipated.

    if it doesn't have the motion at my end, that would be a problem too...
    You would have your tractor hydraulics to move it though.


    How much is a bare cylinder Aaron?
    I dont like to post actual prices here since thy always change but the link is below. I don't have a whole lot left. It was just a one time buy.

    Yanmar Tractor Parts: POWER STEERING DIY CYLINDER ASSEMBLY - NEW!
    Aaron
    Hoye Tractor Parts
    Contact Us
    (940)592-0181
    Yanmar Tractor Parts

  2. #12
    Gold Member
    Join Date
    Sep 2011
    Posts
    415
    Location
    vermont
    Tractor
    Hurlimann 435, Fordson E27n, Bolens HT-23

    Default Re: Hoye Power Steering

    Quote Originally Posted by HoyeTractor View Post
    No, it is not locked. Those small cylinders like that are just really tight fitting and I just have not had a lot of time to go mess with it. We did get it to move out some by clamping one end in a vise and standing on the other end but the phones started ringing again and we are short handed this week. You would think "oh just pull the rod out and measure"... not so much . We can (and will) get it out & measured. Just not the 5 minute project I anticipated.





    You would have your tractor hydraulics to move it though.




    I dont like to post actual prices here since thy always change but the link is below. I don't have a whole lot left. It was just a one time buy.

    Yanmar Tractor Parts: POWER STEERING DIY CYLINDER ASSEMBLY - NEW!
    If the stroke came up short, I could make those long swinging turns, just like now, only with much less effort ;-)

  3. #13
    Platinum Member Scotty Dive's Avatar
    Join Date
    Feb 2010
    Posts
    775
    Location
    Ct
    Tractor
    Yanmar 2020D

    Default Re: Hoye Power Steering

    Resurrecting this thread again. Still thinking about this and it might be a good project over the winter - although working in a freezing garage is not my idea of fun.

    Hoye - any chance you have any customers who have installed this on a 2020 that would be willing to share some pictures or their experience on how the install went? I have the V2 loader and since this is a custom part, I don't want to end up with an very expensive pile of parts that I can't get to fit.
    Thanks,

    Scotty Dive
    Yanmar YM2020D "Git er Done Too"
    Pictures! http://s139.photobucket.com/albums/q...t=dfc00199.pbw
    Yanmar Tractor Database - Click Link, then click file and download the excel file.: https://drive.google.com/file/d/0BxR...it?usp=sharing

  4. #14
    Platinum Member Eddie's Avatar
    Join Date
    Jul 2003
    Posts
    519
    Location
    North Alabama
    Tractor
    YM2020 & Allis Chalmers 6060

    Default Re: Hoye Power Steering

    I put one on a 2020 two wheel drive that has bush hog loader. Maybe in the next day or two I'll get a chance to post some pictures.
    Eddie

    Words to live by
    "Never squat with your spurs on!!!"

    Yanmar YM2020, Great Bend FEL, 5' Bush Hog Finish Mower, 5' King Kutter Rotary Cutter, 5' King Kutter Tiller, 5' King Kutter LS Box, 5' 3PH Grader Blade. 4' Plugger Aerator, 12" 3PH Moldboard Plow, John Deere 455 Lawn Tractor, Ferris IS1000 Zero Turn Mower W/10' home made sprayer and ATV Fertilizer Spreader, Allis Chalmers 6060, 10' Howse Rotary Cutter.

  5. #15
    Super Member kenmac's Avatar
    Join Date
    Feb 2005
    Posts
    5,481
    Location
    The Heart of Dixie
    Tractor
    yanmar 3110D

    Default Re: Hoye Power Steering

    Eddie, How u been ? Haven't seen you here is a while. How are things up north ?
    Yanmar 3110D
    07 Dodge 2500 5.9 Cummins
    Husky 372xp
    Husky 55 Rancher
    Maruyama trimmer
    Husky trimmer
    Redmax BP blower
    Toro zero turn
    North Star 4 K PSI pressure washer
    Honda 300 4 trax
    Yamaha Timberwolf
    liquid logic coupe kayak
    16' Tow Master Dump Trailer ,20' Yanmar Hauler

  6. #16
    Platinum Member Eddie's Avatar
    Join Date
    Jul 2003
    Posts
    519
    Location
    North Alabama
    Tractor
    YM2020 & Allis Chalmers 6060

    Default Re: Hoye Power Steering

    Hello Ken,
    Health has not been great. The old ticker can't seem to stay in rhythm.
    It's cold up north right now, should get better by the weekend but then we are expecting severe weather.
    Haven't done much in the last few months with the yanmar so I haven't been around site much.

    Hey Scotty,
    Haven't forgot the pictures, been very busy with Dr. appointments. Will get them for you.
    Eddie

    Words to live by
    "Never squat with your spurs on!!!"

    Yanmar YM2020, Great Bend FEL, 5' Bush Hog Finish Mower, 5' King Kutter Rotary Cutter, 5' King Kutter Tiller, 5' King Kutter LS Box, 5' 3PH Grader Blade. 4' Plugger Aerator, 12" 3PH Moldboard Plow, John Deere 455 Lawn Tractor, Ferris IS1000 Zero Turn Mower W/10' home made sprayer and ATV Fertilizer Spreader, Allis Chalmers 6060, 10' Howse Rotary Cutter.

  7. #17
    Super Member kenmac's Avatar
    Join Date
    Feb 2005
    Posts
    5,481
    Location
    The Heart of Dixie
    Tractor
    yanmar 3110D

    Default Re: Hoye Power Steering

    I hate to hear you have had some health problems. I guess it comes as we get older. I'm 55 and have been lucky thus far. No major issues. When I don't see folks around for a while, it gets me to wondering if all is ok. It's good to see you around and, I hope your health problems improve ..I'll let you get on with Scotty's issues/questions
    Yanmar 3110D
    07 Dodge 2500 5.9 Cummins
    Husky 372xp
    Husky 55 Rancher
    Maruyama trimmer
    Husky trimmer
    Redmax BP blower
    Toro zero turn
    North Star 4 K PSI pressure washer
    Honda 300 4 trax
    Yamaha Timberwolf
    liquid logic coupe kayak
    16' Tow Master Dump Trailer ,20' Yanmar Hauler

  8. #18
    Gold Member
    Approved Advertiser

    Join Date
    Jul 2002
    Posts
    744
    Location
    North Texas
    Tractor
    Yanmar

    Default Re: Hoye Power Steering

    Hoye - any chance you have any customers who have installed this on a 2020 that would be willing to share some pictures or their experience on how the install went? I have the V2 loader and since this is a custom part, I don't want to end up with an very expensive pile of parts that I can't get to fit.
    Sorry for the late reply to this. Unfortunately, we sold our last cylinder earlier this week and will not be able to get more in the foreseeable future. We can still get just the cylinder that comes in the kit but it is quite a bit more expensive.
    Aaron
    Hoye Tractor Parts
    Contact Us
    (940)592-0181
    Yanmar Tractor Parts

  9. #19
    Platinum Member Scotty Dive's Avatar
    Join Date
    Feb 2010
    Posts
    775
    Location
    Ct
    Tractor
    Yanmar 2020D

    Default Re: Hoye Power Steering

    Quote Originally Posted by HoyeTractor View Post
    Sorry for the late reply to this. Unfortunately, we sold our last cylinder earlier this week and will not be able to get more in the foreseeable future. We can still get just the cylinder that comes in the kit but it is quite a bit more expensive.
    Just my luck - Aaron - is there anyway you can share the cylinder part number so I can try to hunt it down and purchase it separately ????? My shoulder is Killing me!
    Thanks,

    Scotty Dive
    Yanmar YM2020D "Git er Done Too"
    Pictures! http://s139.photobucket.com/albums/q...t=dfc00199.pbw
    Yanmar Tractor Database - Click Link, then click file and download the excel file.: https://drive.google.com/file/d/0BxR...it?usp=sharing

  10. #20
    Gold Member
    Approved Advertiser

    Join Date
    Jul 2002
    Posts
    744
    Location
    North Texas
    Tractor
    Yanmar

    Default Re: Hoye Power Steering

    I would be happy to share any info I had but they didn't have any part number or anything like that... from what i can remember. Just a made in turkey sticker or India or something I think. I believe they are custom built for the kit.

    Ive seen some generic ps cylinders with integrated valves on ebay. Something there might work.
    Aaron
    Hoye Tractor Parts
    Contact Us
    (940)592-0181
    Yanmar Tractor Parts

Page 2 of 3 FirstFirst 123 LastLast

Similar Threads

  1. TO35 Power Steering seal leak at steering column
    By imageshift in forum Parts/Repairs
    Replies: 2
    Last Post: 03-05-2013, 03:04 AM
  2. Replies: 5
    Last Post: 01-30-2013, 12:54 PM
  3. Replies: 3
    Last Post: 10-31-2012, 01:58 PM
  4. Replies: 3
    Last Post: 10-25-2012, 08:37 AM
  5. Replies: 1
    Last Post: 06-29-2009, 04:13 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.