Results 1 to 8 of 8
  1. #1
    Platinum Member Neat 1500's Avatar
    Join Date
    Aug 2009
    Posts
    696
    Location
    Melbourne,Australia
    Tractor
    Yanmar YM1500 Red & YM14 MkII

    Default Calling all GT14 Owners

    My YM14 (Euro version of a GT14) has finally spat out the coupling from the engine to the electric PTO. The carrier is worn, bearings seized and burnt and it has fairly well stripped the spline out. The electric clutch still works well. Question is has anyone had theirs to pieces as i need to get the bearing out of the rear carrier without destroying it but i cant see a way without bending it as it is like only 2mm thick mild steel? Then the next job is to locate a spline socket and shaft I will get the carrier machined out to accept larger bearings which will work, just the spline business has me worried as i have no source of spares here.....
    Attached Thumbnails Attached Thumbnails Calling all GT14 Owners-001-jpg   Calling all GT14 Owners-002-jpg   Calling all GT14 Owners-003-jpg  
    Paul YM1500 & YM14 MkII

  2. #2
    Platinum Member Neat 1500's Avatar
    Join Date
    Aug 2009
    Posts
    696
    Location
    Melbourne,Australia
    Tractor
    Yanmar YM1500 Red & YM14 MkII

    Default Re: Calling all GT14 Owners

    I have parts on the way all thanks to Gary Jamieson. I just need to have a hardened steel collar fitted to my bearing carrier and when the other parts arrive i can re-assemble it. I cant thank Gary enough for his help, a rare and true gentleman.
    Paul YM1500 & YM14 MkII

  3. #3
    Super Member kenmac's Avatar
    Join Date
    Feb 2005
    Posts
    6,733
    Location
    The Heart of Dixie
    Tractor
    yanmar 3110D

    Default Re: Calling all GT14 Owners

    Quote Originally Posted by Neat 1500 View Post
    I have parts on the way all thanks to Gary Jamieson. I just need to have a hardened steel collar fitted to my bearing carrier and when the other parts arrive i can re-assemble it. I cant thank Gary enough for his help, a rare and true gentleman.
    what company is he with ?? I don't remember if I have them on my parts list or not. Glad to see someone was able help you out.
    A Fredricks Yanmar 3110D
    07 Dodge 2500 5.9 Cummins
    Husky 372xp
    Husky 55 Rancher
    Maruyama trimmer
    Husky trimmer
    Redmax BP blower
    Toro zero turn
    North Star 4 K PSI pressure washer
    Honda 300 4 trax
    Yamaha Timberwolf
    liquid logic coupe kayak
    16' Tow Master Dump Trailer ,20' Yanmar Hauler

  4. #4
    Platinum Member Neat 1500's Avatar
    Join Date
    Aug 2009
    Posts
    696
    Location
    Melbourne,Australia
    Tractor
    Yanmar YM1500 Red & YM14 MkII

    Default Re: Calling all GT14 Owners

    Quote Originally Posted by kenmac View Post
    what company is he with ?? I don't remember if I have them on my parts list or not. Glad to see someone was able help you out.
    I think he is called Jamieson Tractor, i am sure he will pipe up and correct me
    Paul YM1500 & YM14 MkII

  5. #5
    Platinum Member Neat 1500's Avatar
    Join Date
    Aug 2009
    Posts
    696
    Location
    Melbourne,Australia
    Tractor
    Yanmar YM1500 Red & YM14 MkII

    Default Re: Calling all GT14 Owners

    Finally after 10 odd months i have it completed and back together. I got a couple of hours mowing in and it worked flawlessly. I had the PTO carrier machined and a hardened collar for the bearing fitted, new bearings installed, Gary's spline female which was in great shape. I should now get a few good years of mowing out of it again. I will also start fixing a few little things as i go now like the sloppy steering and it's smoking habit (not too bad though!) Once again thanks to Gary @ Jamieson Tractor for his assistance with it all.
    Paul YM1500 & YM14 MkII

  6. #6
    Elite Member
    Join Date
    Dec 2009
    Posts
    3,498
    Location
    gilmer tx
    Tractor
    Bobcat CT235

    Default Re: Calling all GT14 Owners

    Congratulations!

  7. #7
    Platinum Member Neat 1500's Avatar
    Join Date
    Aug 2009
    Posts
    696
    Location
    Melbourne,Australia
    Tractor
    Yanmar YM1500 Red & YM14 MkII

    Default Re: Calling all GT14 Owners

    Quote Originally Posted by winston1 View Post
    Congratulations!
    I couldn't mow anymore with the push mower, enough's enough!
    Paul YM1500 & YM14 MkII

  8. #8
    Gold Member bmaverick's Avatar
    Join Date
    Sep 2013
    Posts
    446
    Location
    Nashville
    Tractor
    now YM2610 retired JD 850

    Default Re: Calling all GT14 Owners

    After 10 months. Seems that some tractor repairs take longer than others. haha

    I can relate to that.

    YM2610
    DYT4000
    retired JD850

    Green acres is the life for me. lol

    Nashville

Similar Threads

  1. Calling all JD 46 backhoe owners...
    By jimgerken in forum Attachments
    Replies: 7
    Last Post: 08-08-2008, 07:44 AM
  2. Calling All LandPride Owners ...
    By JGY in forum John Deere Owning/Operating
    Replies: 0
    Last Post: 08-03-2008, 10:40 PM
  3. Calling all M4900 owners
    By bobbyjak in forum Kubota Owning/Operating
    Replies: 9
    Last Post: 08-15-2005, 02:27 PM
  4. Calling all TC55DA owners
    By bobbyjak in forum New Holland Owning/Operating
    Replies: 7
    Last Post: 08-15-2005, 09:27 AM
  5. Calling all 5105 owners
    By bobbyjak in forum John Deere Owning/Operating
    Replies: 6
    Last Post: 08-14-2005, 11:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.