YM1802D Clutch housing broken

   / YM1802D Clutch housing broken #1  

DavesTractor

Elite Member
Joined
Sep 25, 2002
Messages
4,463
Location
Red Bluff, CA
Tractor
Changes often!
I need a clutch housing for a Yanmar YM1802D or 2002D. I have a customer that cracked his...BIG crack. If any of you are parting out such a tractor or know of someone who is, please let me know.

Meanwhile, put a subframe under the tractor if you want to run a backhoe and a loader on one of these fine little Yanmars. The stresses in the center of the tractor take their toll over time.

Thanks,
 
   / YM1802D Clutch housing broken #2  
Dave, as a last resort, a good shop could probably weld that for you. At least to make structurally sound, and fill in any leaks with "JB".
 
   / YM1802D Clutch housing broken
  • Thread Starter
#3  
Norm,

You're probably right regarding the welding. It is the dry section of the trans, so being fluid tight isn't an issue.

Thanks for the input.

Dave
 
 
Top