Results 1 to 3 of 3
  1. #1
    Elite Member
    Join Date
    Sep 2002
    Posts
    3,743
    Location
    Red Bluff, CA
    Tractor
    Changes often!

    Default YM1802D Clutch housing broken

    I need a clutch housing for a Yanmar YM1802D or 2002D. I have a customer that cracked his...BIG crack. If any of you are parting out such a tractor or know of someone who is, please let me know.

    Meanwhile, put a subframe under the tractor if you want to run a backhoe and a loader on one of these fine little Yanmars. The stresses in the center of the tractor take their toll over time.

    Thanks,

  2. #2
    Elite Member
    Join Date
    Mar 2002
    Posts
    3,808

    Default Re: YM1802D Clutch housing broken

    Dave, as a last resort, a good shop could probably weld that for you. At least to make structurally sound, and fill in any leaks with "JB".

  3. #3
    Elite Member
    Join Date
    Sep 2002
    Posts
    3,743
    Location
    Red Bluff, CA
    Tractor
    Changes often!

    Default Re: YM1802D Clutch housing broken

    Norm,

    You're probably right regarding the welding. It is the dry section of the trans, so being fluid tight isn't an issue.

    Thanks for the input.

    Dave

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.