3110D - GPM?

   / 3110D - GPM? #1  
Republic of Texas

Republic of Texas

Bronze Member
Joined
May 15, 2012
Messages
81
Location
North East Texas
Tractor
John Deere 850 - Yanmar 3110D
How many GPM does thw hydraulic pump put out on the 3110D?

I'm looking to add remotes & so I need to know which control valves to buy.
 
   / 3110D - GPM? #2  
Hoye sells this pump for your tractor without power steering. Do you have power steering? I believe it is rated at 9cc. HYDRAULIC PUMP: Yanmar Tractor Parts I believe that translates to 5.7gpm at 2400rpm. Not sure whether your original pump puts out that much or not . I suspect it has a tag on it showing the cc's. Might take a look.
 
   / 3110D - GPM?
  • Thread Starter
#3  
If I were to add more remotes & control valves, do the control valves have to be rated for 5.4 GPM?

Or, can I use a valve that is rated for higher GPM?
 
   / 3110D - GPM? #4  
You can use one rated for higher. (8GPM I believe)I added a grapple valve. it works just fine. I think it's just saying it won't handle anymore than 8 GPM
 
   / 3110D - GPM?
  • Thread Starter
#5  
kenmac said:
You can use one rated for higher. (8GPM I believe)I added a grapple valve. it works just fine. I think it's just saying it won't handle anymore than 8 GPM
Click to expand...
Thanks kenmac!

Would you happen to have some pics & info on how you added the grapple?
 
   / 3110D - GPM? #7  
If you click on Kenmac's name and then on his threads you can likely find them.
 
   / 3110D - GPM? #10  
If I figured it out, anyone can. What loader do you have ? Does the loader valve have a PB port. You would have to be able to get a PB sleeve for the loader valve.
 
You must log in or register to reply here.
 

Footer Links 1

Top