Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1

    Join Date
    Jan 2005
    Posts
    10
    Location
    Dallas, Texas

    Default Input drive shaft for YM 1510 4x4

    Hello,

    I need an input drive shaft for Yanmar YM 1510D. Either used or new would be fine.

  2. #2
    Veteran Member
    Join Date
    May 2004
    Posts
    1,288
    Location
    S.E Texas
    Tractor
    Ym1300d-1401D-1601D , 1610D & Massey Ferguson 1020

    Default Re: Input drive shaft for YM 1510 4x4

    Leon4340,

    Is your old one broken, or beyond repair?
    Or is it missing? Sometimes the FWD shaft is intentionally removed and others buy them that way.

    Your location in your profile will help in finding a supplier nearest you.

    Good Luck and welcome to TBN,
    Regards, Mark

  3. #3

    Join Date
    Jan 2005
    Posts
    10
    Location
    Dallas, Texas

    Default Re: Input drive shaft for YM 1510 4x4

    The input driveshaft is broken. I need another one, it could use a use or new one.

  4. #4
    Gold Member
    Approved Advertiser

    Join Date
    Jul 2002
    Posts
    744
    Location
    North Texas
    Tractor
    Yanmar

    Default Re: Input drive shaft for YM 1510 4x4

    Leon,
    You are pretty close to us (2+ hours). We have a good used one in stock and many more on the way. Give me a call or email for the details.

    Aaron
    Parts@HoyeTractor.com
    (940)438-0386

  5. #5
    Silver Member
    Join Date
    Mar 2004
    Posts
    136
    Location
    Northern California
    Tractor
    Yanmar F15D

    Default Re: Input drive shaft for YM 1510 4x4

    Leon, welcome to the forum. There have been a lot of discussions and second hand comments recently about refurbished imports. As a refurb dealer, I hope you can give us your perspective on the subject. Good to have you here.

  6. #6

    Join Date
    Jan 2005
    Posts
    10
    Location
    Dallas, Texas

    Default Re: Input drive shaft for YM 1510 4x4

    Hello,

    I wanted to say thank you for the warm welcome. In the earlier message, I was looking for a input drive shaft. Well, that isn't what I'm looking for, what I'm really looking for is "INPUT PINION DRIVE SHAFT". Please help. Thank you.

  7. #7

    Join Date
    Mar 2002
    Posts
    643
    Location
    Near Hagerstown, MD
    Tractor
    Yanmar models: YM1110D, YM1301D

    Default Re: Input drive shaft for YM 1510 4x4

    It would probably help parts suppliers considerably if you could either take a digital photo of the broken piece, or if its missing, perhaps a photo of where it is to be installed. Then post the photo. Or, if you have a parts diagram, circle the required part, scan the drawing, and post it. Of course, if you had a Yanmar part number, that would be the quickest and easiest way to identify the part.

  8. #8
    Gold Member
    Approved Advertiser

    Join Date
    Jul 2002
    Posts
    744
    Location
    North Texas
    Tractor
    Yanmar

    Default Re: Input drive shaft for YM 1510 4x4

    He wants the pinion gear in part number 1 here-->

    http://www.hoyetractor.com/Merchant2...=YM15104WDDIFF

    Unfortunately they are fairly rare and are not cheap. We priced it to him as a set (the only way that we will sell ring and pinion gears because they need to stay as a matched set). Maybe someone has just a pinion gear that he could buy.



    Aaron
    Parts@HoyeTractor.com
    (940) 438-0386

  9. #9
    Gold Member
    Approved Advertiser

    Join Date
    Jul 2002
    Posts
    744
    Location
    North Texas
    Tractor
    Yanmar

    Default Re: Input drive shaft for YM 1510 4x4

    Yanmar part number 194441-13100

    Aaron
    Parts@HoyeTractor.com
    (940)438-0386

  10. #10
    Veteran Member
    Join Date
    Apr 2002
    Posts
    2,086
    Location
    SW Ohio
    Tractor
    yanmar

    Default Re: Input drive shaft for YM 1510 4x4

    OK, I've been watching this thread biting my tongue. Let me get this straight. The president of a company that brings VN reconditioned tractors into the US at the clip of 4,000-5,000 per year (per his website) has to come to an online forum to look for parts, and wants to obtain just the pinion gear from a matched ring and pinion set, having turned down the matched set. An earlier post said </font><font color="blue" class="small">( There have been a lot of discussions and second hand comments recently about refurbished imports. As a refurb dealer, I hope you can give us your perspective on the subject)</font> I think this thread dots the "i"s and crosses the "t"s on most of those discussions.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.