Results 1 to 3 of 3
  1. #1
    Silver Member
    Join Date
    Oct 2005
    Posts
    196
    Location
    Gisela, AZ
    Tractor
    yanmar 1110d ,fx28d

    Default ym 2000 4x4 front seals

    need to do the front axle seal on my 2000, did the rear 2wks ago, piece of cake once I got the hubs off. any info would be apprciated.
    thanks
    Mark

  2. #2
    Gold Member
    Approved Advertiser

    Join Date
    Jul 2002
    Posts
    744
    Location
    North Texas
    Tractor
    Yanmar

    Default Re: ym 2000 4x4 front seals

    If you did the rears already - the front will be no problem. You can see how they come apart here-->

    4WD_EXTERNAL: Yanmar Tractor Parts

    Just remove the wheel and the 4 bolts (#52) that hold on the steering arm and the box halves will seperate. This will let you move the project to a workbench. From there you can replace the knuckle seal (#31). To replace the axle seal you remove the plate (#31), the axle nut, and then pull out the axle. Then you can replace the axle seal (#34).

    Aaron
    Parts@HoyeTractor.com
    (940)592-0181
    Aaron
    Hoye Tractor Parts
    Contact Us
    (940)592-0181
    Yanmar Tractor Parts

  3. #3
    Silver Member
    Join Date
    Oct 2005
    Posts
    196
    Location
    Gisela, AZ
    Tractor
    yanmar 1110d ,fx28d

    Default Re: ym 2000 4x4 front seals

    OH, now I get it. I was looking at the picture but couldn't quite make it work.
    thanks for the explination. I'll give you a call this afternoon after my 4 hour dentist appointment (ouch).
    thanks
    Mark

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.