Rafter3Ranch
New member
- Joined
- Dec 2, 2008
- Messages
- 1
I need to get a manual for a Century 2535 ASAP Help!!!!!
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
century 2035 manuals
- Thread starter 4x4home
- Start date
- Views: 26748
-
- Tags
- century 2035
OK, head and exhaust manifold bolt torque figures sent via e-mail, along with a best effort text only diagram of the tightening sequence - which I regard as at least as important as the actual values.
Hmmm, lets try reproducing it here - for posterity, etc;
========================================================
Hi,
I'm assuming this is the Mitsubishi engine, the manual shows the 3 cylinder version and 4 cylinder together and only rarely discusses them separately.
The design allows for 3 or 4 cylinders with most of the components the same.
OK, assuming he knows what he is doing...
Cylinder head bolts are M10 ... 9 Kgm or 65 ft lbs or 88 Nm., according to what he has available for a torque wrench.
He will have the exhaust manifold off as well; 1.85 Kgm or 13.5 ft lbs or 18 Nm
The inlet manifold is the same as the exhaust.
There is a CHANCE that your guy hasn't worked on 3 cylinder engines before, so I'll try to convey the tightening sequence;
8....4....2....7
6....1....3....5
..10...9...11
Front of engine to left of this page <--
on the 4 cylinder it is;
10....4....2....5....7
.8....6....1....3....9
...14..12...11..13
Yes, the 3rd row is staggered.
It is the best I can do without graphics.
<-- FRONT
again, front of engine is to left of this page.
Let me know if you want/need scans of any pages, if so give me an e-mail address to send them to.
BTW, it is "Torque", but I'm not the spelling or gammar ploice
\R
Hmmm, lets try reproducing it here - for posterity, etc;
========================================================
Hi,
I'm assuming this is the Mitsubishi engine, the manual shows the 3 cylinder version and 4 cylinder together and only rarely discusses them separately.
The design allows for 3 or 4 cylinders with most of the components the same.
OK, assuming he knows what he is doing...
Cylinder head bolts are M10 ... 9 Kgm or 65 ft lbs or 88 Nm., according to what he has available for a torque wrench.
He will have the exhaust manifold off as well; 1.85 Kgm or 13.5 ft lbs or 18 Nm
The inlet manifold is the same as the exhaust.
There is a CHANCE that your guy hasn't worked on 3 cylinder engines before, so I'll try to convey the tightening sequence;
8....4....2....7
6....1....3....5
..10...9...11
Front of engine to left of this page <--
on the 4 cylinder it is;
10....4....2....5....7
.8....6....1....3....9
...14..12...11..13
Yes, the 3rd row is staggered.
It is the best I can do without graphics.
<-- FRONT
again, front of engine is to left of this page.
Let me know if you want/need scans of any pages, if so give me an e-mail address to send them to.
BTW, it is "Torque", but I'm not the spelling or gammar ploice
\R
Erik_in_Hoyt
Platinum Member
a bit over a month ago i emailed Branson and got a very fast reply asking for my mailing address.
They sent me a set of loose leaf service manuals. (with binders, they're $$. without the binder to put them in, apparently they're free)
Try that if it doesn't work, let me know and I can mail you the set they sent me, since my tractor was stolen a week after i got the manuals...
They sent me a set of loose leaf service manuals. (with binders, they're $$. without the binder to put them in, apparently they're free)
Try that if it doesn't work, let me know and I can mail you the set they sent me, since my tractor was stolen a week after i got the manuals...
I would really appreciate a PDF file for the Century 2035 tractor manual.
Send me an EXTERNAL e-mail message as suggested in the INTERNAL message I just sent you.
Reg
Hello Reg....I would REALLY appreciate being able to have a repair/parts manual for my Century 2035. My email is bogeyman90@verizon.net
Thx...
rob
Thx...
rob
Last edited:
rhed1
New member
I have as a .pdf file the Century C29, C35, C38, C42, C47 manual, the 29 and 35 being the smaller frame models. It is marked Edition:12/2004.
Send private message if you want a copy via e-mail.
I'm hoping that you can help me, Reg - I have a Branson 3510 and I desperately need a manual. Are you still able to send a copy of the C35 Century manual? None of the previous links are any good anymore.
My apologies, I didn't know how to send you a private message...
